Airtac TN Double Axis Double Rod Cylinder TN10X55S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X55S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X55S
A twin-rod, double-acting cylinder carries its load on a plate supported by two parallel rods, which resist bending and twisting and allow mounting without rotation. At 10 mm bore and 55 mm stroke, the push side gives about 78.5 N of theoretical thrust at 0.5 MPa, while the external bumper cushions impact and adjusts the stroke over -5 to 0 mm.
TN10X55S is a genuine AirTAC part made to the enterprise standard, with a magnet fitted as standard and magnetic-switch slots around the body. Medium is air filtered to 40 um; operating pressure for this bore is 0.2-1.0 MPa (29-145 psi). We confirm dimensions and sizing for the 55 mm stroke from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X55S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X55S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Expect about 78.5 N of push thrust at 0.5 MPa from the 10 mm bore (pull side is lower); choose TN bore 16 or above for heavier loads. The 55 mm stroke is listed in the TN10 table, but be cautious with strokes that run long on a small bore - the short front cover limits rod exposure, so confirm with us first. TN is PT thread only; the TR series (JIS standard) adds G and NPT plus a precise lengthening guide. Allowable side load is given as curves - route your case to us for confirmation.
Applications
Accumulation stopper gate
Raises and lowers a stopper blade that holds parts on an accumulation conveyor. The twin rods keep the blade level through the 55 mm stroke so parts stop squarely, not rotated.
Small clamp on a machining jig
Clamps small parts on a light-duty jig before a drilling or tapping step. The plate mounts directly on the clamp arm and the twin-rod design stops the clamping face from twisting.
Tray indexing push
Advances small trays or carriers one position along a rail. The non-rotating plate keeps the push face aligned with the tray edge over the full stroke.
FAQ
How much force does the TN10X55S give at 0.5 MPa?
About 78.5 N of theoretical push thrust at 0.5 MPa for the 10 mm bore; the pull side is lower. If your load needs more, step up to a larger TN bore or talk to us about sizing.
Will the load rotate during the stroke?
No. The two parallel rods on the shared plate give resistance to bending and twisting, so the mounted load moves without rotating. Exact overall dimensions for the 55 mm stroke are confirmed from the datasheet.