Airtac TN Double Axis Double Rod Cylinder TN10X5S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN10X5S is a genuine TN twin-rod (double-rod) double-acting cylinder, 10 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 78.6 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore10 mm
- Push thrust @0.5 MPa78.6 N
- Operating pressure0.2 - 1.0 MPa (29 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN10X5S
The TN10X5S is a double-acting twin-rod cylinder: two parallel rods fixed to one shared plate keep the load from rotating and resist bending and twisting. With a 10 mm bore and a very short 5 mm stroke, it suits compact clamp, stop and eject jobs where only a few millimetres of travel are needed. At 0.5 MPa the push side delivers a theoretical thrust of 78.5 N. An external bumper pad at the front cushions end-of-stroke impact and lets you trim the effective stroke over -5 to 0 mm.
This is a genuine AirTAC part built to the TN enterprise standard, PT thread only, with an M5x0.8 port. A position-detecting magnet is fitted as standard on every TN10X5S, with magnetic-switch slots around the body. Operating pressure for this bore is 0.2-1.0 MPa (29-145 psi). We confirm exact dimensions and sizing help from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN10X5S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN10X5S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 10 mm |
| Push thrust @0.5 MPa | 78.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 1.0 MPa (29 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the bore for thrust first: this 10 mm bore gives 78.5 N theoretical push at 0.5 MPa, so step up to 16, 20, 25 or 32 mm if you need more force. TN is the enterprise-standard twin-rod line with PT thread only; if you need G or NPT ports or a precise guide grade with higher non-rotating accuracy and a lengthening sliding-support guide, pick the TR series instead. Strokes for the 10 mm bore are available only within the catalogue table, so confirm your stroke from the datasheet, and beware of specifying over-long strokes that exceed the short-cover range. Side-load capability is published as curves only - route your load case to us and we will check it.
Applications
Short-stroke part clamping
Clamps small workpieces in a machining or assembly fixture where a 5 mm clamp motion is enough and the plate must stay square to the part.
Pallet stopper on a transfer line
Drops up as a stopper to halt pallets or carriers at a station without rotating under the side contact of the moving load.
Nest ejection of small parts
Pushes finished small components out of a nest orLocating fixture with twin-rod stability, so the pusher face does not twist off-line.
FAQ
What does the S in TN10X5S mean - is the magnet optional?
No. S simply denotes the magnet, and every TN-series twin-rod cylinder is magnet-fitted as standard - there is no non-magnetic version to choose from. The trailing thread code is blank here, which means PT ports; TN is offered with PT thread only.
Will the TN10X5S plate stay rotation-free under an off-centre load?
Yes - the two parallel rods on one shared plate resist bending and twisting, so the load mounts without rotating. How much side load it tolerates is published only as curves, not as a single number, so send us your load case and we will confirm it from the datasheet.