Airtac TN Double Axis Double Rod Cylinder TN20X70S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN20X70S is a genuine TN twin-rod (double-rod) double-acting cylinder, 20 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 314.2 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore20 mm
- Push thrust @0.5 MPa314.2 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN20X70S
A twin-rod cylinder guides its load between two parallel rods mounted on a shared plate, so the plate moves without rotating and resists bending and twisting. The 20 mm bore produces 314.2 N of push-side thrust at 0.5 MPa, well matched to pushers, clamps and light transfer duty, and the 70 mm stroke extends the working reach. A bumper on the front face cushions impact and adjusts the effective stroke over -5 to 0 mm.
TN20X70S is a genuine AirTAC part to the TN enterprise standard, double-acting, with PT thread ports and M5x0.8 port size on this bore. The magnet is fitted as standard with magnetic-switch slots around the body - it is not an add-on option. Medium is air filtered to 40 um, at 0.15-1.0 MPa (22-145 psi) for this bore, 30-500 mm/s. Datasheet confirmation of dimensions and side-load is available on request.
Airtac TN Double Axis Double Rod Cylinder TN20X70S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN20X70S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 314.2 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the 20 mm bore for twin-rod work needing 314.2 N push thrust at 0.5 MPa; smaller TN bores give less force, 25 and 32 mm more. TN is the enterprise-standard series and offers PT thread ports only - the JIS-standard TR series adds G and NPT options plus its precise guide grade, with higher non-rotating accuracy and a lubrication-free lengthening sliding-support guide. The 70 mm stroke is within this bore's table; as a rule, keep strokes modest on a short twin-rod body and route overhang and side-load questions to us for confirmation from the datasheet.
Applications
Tote pusher in pick module
Pushes totes from a pick face onto a takeaway conveyor; the twin-rod plate keeps the push face parallel to the tote through the 70 mm stroke.
Light press-fit assist
Presses bushings or fittings into housings on a small bench fixture; two rods resist the twisting moment a single-rod press would see.
Guide rail width adjuster
Sets the gap between conveyor guide rails for different product widths; the non-rotating plate keeps both rails moving squarely together.
FAQ
What thread options does the TN20X70S have?
TN-series cylinders use PT thread ports only, with M5x0.8 ports on this 20 mm bore. If your installation needs G or NPT ports, the TR twin-rod series offers PT, G and NPT.
Can I mount a side load on this cylinder?
The twin-rod plate resists twisting, but allowable side load is published as curves rather than a single figure. Send us the load and mounting arrangement and we will confirm suitability and dimensions from the datasheet.