Airtac TN Double Axis Double Rod Cylinder TN20X95S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN20X95S is a genuine TN twin-rod (double-rod) double-acting cylinder, 20 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 314.2 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore20 mm
- Push thrust @0.5 MPa314.2 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN20X95S
The TN20X95S is a double-acting twin-rod cylinder: two parallel rods on one shared plate resist bending and twisting, so the load mounts on the plate without rotating. The 20 mm bore gives a theoretical push thrust of 314.2 N at 0.5 MPa (the pull side is lower), and the 95 mm stroke provides extended travel for pushes, transfers and stops across wider stations. The external front bumper cushions impact and adjusts the effective stroke over -5 to 0 mm.
This is a genuine AirTAC TN cylinder to the enterprise standard, with PT ports and a magnet fitted as standard on every model; magnetic-switch slots run around the body. Operating pressure is 0.15-1.0 MPa (22-145 psi) for the 20 mm bore, with air filtered to 40 um and speeds of 30-500 mm/s. We confirm dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN20X95S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN20X95S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 314.2 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Check thrust first: bore 20 gives 314.2 N theoretical push at 0.5 MPa, with the pull side lower - move to a larger bore if your load needs more. TN is the enterprise-standard line with PT ports only; TR is the JIS-standard alternative offering PT, G or NPT threads plus a precise low-deflection guide with ports on both sides. Stroke 95 mm falls within the bore-20 stroke table, but be cautious about over-long strokes needing extra cover clearance, and route side-load limits (published as curves) to us.
Applications
Lane diverter
Diverts packs between conveyor lanes at a sorting point; the twin rods hold the diverter plate square through the 95 mm travel.
Press-fit assist
Holds a part steady during a light staking or pressing operation; the twin-rod plate resists the twisting moment on the tooling.
Pallet stopper
Stops pallets or trolleys at a dock or cell boundary; the plate faces the load without rotating, cycle after cycle.
FAQ
How much thrust does the 20 mm bore give?
The theoretical push thrust at 0.5 MPa is 314.2 N; the pull side is lower. Operating pressure for this bore is 0.15-1.0 MPa (22-145 psi). Check your load against the push figure before fixing the bore size.
What mounting and media conditions apply?
Mounting is embedded fixed, with three-side mounting holes on the plate and multi-face holes on the body. The medium is air filtered to 40 um, operating from -20 to 70 C at 30-500 mm/s. Overall dimensions vary by stroke, so ask us to confirm them from the datasheet.