Airtac TN Double Axis Double Rod Cylinder TN25X125SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X125SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X125SH
A twin-rod cylinder uses two parallel rods on a shared plate so the load resists bending and twisting without rotating. The TN25X125SH delivers a 25 mm bore with a 125 mm stroke; at 0.5 MPa the push-side thrust is about 491 N. An external bumper cushions end-of-stroke impact and lets you trim the effective stroke by up to 5 mm.
This is a genuine AirTAC TN twin-rod cylinder built to the enterprise standard with PT threads. A sintered NdFeB magnet is standard on every unit for position sensing through the body's switch slots. We confirm exact dimensions and rod diameter from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X125SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X125SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Match the bore to the force you need: the 25 mm bore gives about 491 N push at 0.5 MPa, and the pull figure is lower. TN is the enterprise-standard line with PT ports only; if you need JIS dimensions or higher non-rotating precision, consider the TR series instead. Keep the stroke within the rated range for the bore to limit overhang, and confirm allowable side load with us for your specific mounting.
Applications
Belt Pusher
Advances parts down an inspection conveyor with two rods holding the pusher plate flat and square against twisting under off-center loads.
Machining Clamp
Holds a casting steady during a milling pass; the twin rods keep the clamp face from rotating so the workpiece stays aligned.
Cross-Station Transfer
Slides a component horizontally between two assembly fixtures; the shared rod plate prevents the payload from yawing mid-stroke.
FAQ
What thrust does the TN25X125SH deliver at 0.5 MPa?
At 0.5 MPa the push-side thrust is about 491 N; the pull side is lower due to rod area. Operating pressure for the 25 mm bore is 0.15-1.0 MPa (22-145 psi).
How does the bumper work on this cylinder?
The bumper is an external front pad that absorbs end-of-stroke impact and lets you trim the effective stroke over a -5 to 0 mm range. It is not an air cushion. We confirm dimensions and side-load limits from the datasheet on request.