Airtac TN Double Axis Double Rod Cylinder TN25X150SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X150SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X150SH
The AirTAC TN25X150SH is a double-acting twin-rod cylinder with a 25 mm bore and 150 mm stroke. Two parallel rods on a shared plate resist bending and twisting so the load mounts and moves without rotating. At 0.5 MPa the 25 mm bore pair delivers about 490.9 N of theoretical push thrust, with push exceeding pull. An external front bumper cushions impact and lets you trim the effective stroke by -5 to 0 mm.
This is a genuine AirTAC TN-series part built to the enterprise standard with PT-thread ports. A sintered NdFeB magnet is standard on every unit, with magnetic-switch slots around the body for position sensing. We confirm exact dimensions, rod diameter, and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X150SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X150SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the bore for the thrust you need: the 25 mm bore pair gives about 490.9 N push at 0.5 MPa. TN is the enterprise-standard twin-rod with PT ports only; if you need the JIS standard with G or NPT threads and higher non-rotating precision, ask about the TR series. The 150 mm stroke is within the bore's listed range, but mind the short-cover caution: long strokes on the compact body raise rod-end deflection. We route allowable side-load curves to you on request.
Applications
Machining Clamp
Holds an aluminium workpiece against a V-block fixture during a milling pass, the twin rods preventing the clamp arm from rotating under side cut load.
Transfer Pusher
Pushes small electronic housings from a belt conveyor into a test nest, the dual-rod design keeping the pusher plate parallel through the full 150 mm stroke.
Pallet Stopper
Rises between conveyor rollers to halt an incoming pallet, the twin rods absorbing the side impact without the stopper bar twisting or bending.
FAQ
How much thrust does the TN25 bore produce at 0.5 MPa?
The 25 mm bore pair generates a theoretical push thrust of about 490.9 N at 0.5 MPa, with the push side higher than pull. Choose the bore for the thrust you need; we confirm sizing and side-load limits from the datasheet.
What cushions the TN series at end of stroke?
A front bumper pad cushions impact and trims the effective stroke by -5 to 0 mm. It is not an air cushion. Contact us to confirm dimensions and allowable side load from the datasheet for your mounting.