Airtac TN Double Axis Double Rod Cylinder TN25X15SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X15SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X15SH
The AirTAC TN25X15SH is a double-acting twin-rod cylinder with a 25 mm bore and 15 mm stroke. Two parallel rods on a shared plate resist bending and twisting so the load mounts and moves without rotating. At 0.5 MPa the 25 mm bore pair delivers about 490.9 N of theoretical push thrust, with push exceeding pull. An external front bumper cushions impact and lets you trim the effective stroke by -5 to 0 mm.
This is a genuine AirTAC TN-series part built to the enterprise standard with PT-thread ports. A sintered NdFeB magnet is standard on every unit, with magnetic-switch slots around the body for position sensing. We confirm exact dimensions, rod diameter, and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X15SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X15SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the bore for the thrust you need: the 25 mm bore pair gives about 490.9 N push at 0.5 MPa. TN is the enterprise-standard twin-rod with PT ports only; if you need the JIS standard with G or NPT threads and higher non-rotating precision, ask about the TR series. The 15 mm stroke is short and well within the bore's listed range, ideal for compact clamp or stopper duties. We route allowable side-load curves to you on request.
Applications
Press Insert
Drives a bearing insert into a housing bore on a short 15 mm stroke, the twin rods keeping the ram face parallel so the insert seats without cocking.
Divert Gate
Pushes a divert finger across a conveyor lane to route parcels, the dual-rod design holding the finger steady against belt drag without rotation.
Workpiece Lift
Lifts a stamped bracket from a lower die to an exit chute, the twin rods carrying the bracket weight without the lift plate tilting or twisting.
FAQ
What thread options does the TN series offer?
TN is PT-thread only. If you need G or NPT port threads, or higher non-rotating precision with a lengthening sliding guide, ask about the TR (JIS standard) series. We confirm port details and compatibility from the datasheet.
Is the magnet an optional add-on?
No. The entire TN and TR twin-rod series is magnet-fitted as standard, with switch slots around the body for position sensing. There is no non-magnetic variant to choose; every unit ships with a sintered NdFeB magnet.