Airtac TN Double Axis Double Rod Cylinder TN25X170S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X170S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X170S
A twin-rod cylinder uses two parallel rods sharing one plate so the load travels without rotating; the twin rods resist bending and twisting under off-center forces. The TN25X170S pairs a 25mm bore with a 170mm stroke, producing approximately 490.9 N of push thrust at 0.5 MPa. An external bumper at the front cushions impact and adjusts the effective stroke over a -5 to 0 mm range.
This is a genuine AirTAC part built to the enterprise standard for twin-rod cylinders with PT port threads. A sintered NdFeB magnet is fitted as standard for position sensing through switch slots around the body. Contact us to confirm dimensions and sizing details from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X170S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X170S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 25mm suits applications needing roughly 490.9 N of push thrust at 0.5 MPa; the pull-side figure is lower because the rod area reduces the effective piston area. The TN series is the enterprise-standard line with PT threads only; for JIS mounting, G or NPT thread options, or higher non-rotating precision, consider the TR series. Stroke 170mm falls within the bore 25 range, but avoid strokes that exceed the short-cover guide capacity. Confirm allowable side load with us before ordering.
Applications
Lane Pusher
Pushes items from a conveyor lane into a sorting chute; the twin rods keep the push plate square to the product face across the full 170mm travel without rod-end rotation.
Fixture Clamp
Clamps a machined workpiece against a stop; the twin-rod design prevents the clamp pad from twisting under off-center load so the part seats repeatably each cycle.
Transfer Stop Gate
Acts as a stop blade at a pallet transfer point; the parallel rods hold the blade flat against the pallet face without deflection or rotation.
FAQ
What thrust does the TN25X170S produce at 0.5 MPa?
The bore 25 twin-rod configuration delivers approximately 490.9 N of push thrust at 0.5 MPa; the pull-side value is lower due to the rod area. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
How does the bumper cushion work on this cylinder?
An external bumper pad at the front absorbs impact energy and trims the effective stroke over a -5 to 0 mm range. It is a bumper cushion, not an air cushion. Contact us to confirm full dimensions and allowable side load from the datasheet.