Airtac TN Double Axis Double Rod Cylinder TN25X200SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X200SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X200SH
A twin-rod cylinder uses two parallel rods on a shared plate to resist bending and twisting, so the load travels without rotating. This AirTAC TN25X200SH variant pairs a 25 mm bore with a 200 mm stroke; at 0.5 MPa the push thrust is 490.9 N. The external bumper cushions impact and adjusts the stroke over a -5 to 0 mm range.
This is a genuine AirTAC part built to the enterprise standard with a standard magnet and magnetic-switch slots around the body. TN cylinders use PT threads only. We confirm the exact variant specification and dimensions from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X200SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X200SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose this 25 mm bore when you need the 490.9 N push at 0.5 MPa that the twin-rod design delivers. TN is the enterprise-standard series with PT ports only; the TR series adds JIS mounting, higher non-rotating precision, a lengthening sliding guide, and a choice of PT, G, or NPT threads. The 200 mm stroke is within the bore's table, but long strokes on the short-cover body raise rod deflection - confirm allowable side-load with us before ordering.
Applications
Push-Off Station
Mounts at the end of a conveyor to push rejected parts sideways off the belt; the twin rods keep the pusher plate square so the part exits cleanly without rotation.
Clamp Actuator
Holds a workpiece against a fixture during machining; the anti-rotation rods prevent the clamp arm from twisting under cutting load for repeatable clamping force.
Vertical Lift Gate
Raises a stop gate between two process stations; the two rods guide the gate straight up without bind even when the load sits off-center on the plate.
FAQ
What does the bore 25 push thrust at 0.5 MPa work out to?
The twin-rod design on the 25 mm bore gives a theoretical push thrust of 490.9 N at 0.5 MPa. Pull thrust is lower because the rod area subtracts from the piston area. Confirm the exact figure for your pressure from the datasheet.
Can I use this cylinder for a long-stroke lifting load?
The 200 mm stroke is within the bore's table, but twin-rod cylinders with long strokes on a short-cover body can deflect under side-load. Confirm the allowable side-load curve for your specific mount with us before ordering.