Airtac TN Double Axis Double Rod Cylinder TN25X25S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X25S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X25S
Twin-rod cylinders use two parallel rods on a shared plate to resist bending and twisting, allowing the load to mount without rotating. This AirTAC TN25X25S model has a 25mm bore and 25mm stroke, yielding a 0.5 MPa push thrust of 490.9 N. An external bumper cushions impact and adjusts stroke over -5 to 0 mm.
This is a genuine AirTAC part meeting the enterprise standard. A magnet is standard on every unit for position sensing, with slots around the body. We confirm dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X25S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X25S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select this 25mm bore for a 490.9 N thrust at 0.5 MPa; the push side delivers higher force than pull. The TN series follows enterprise standards with PT threading only. The 25mm stroke is chosen within the bore's table; use caution against over-long strokes with the short cover to prevent side-load issues, which we help you route from the datasheet.
Applications
Transfer Pusher
Pushes workpieces sideways on a conveyor with two parallel rods preventing the load from twisting during the transfer.
Clamping Jig
Holds a machined part firmly in a fixture where anti-rotation rigidity keeps the clamp face aligned under thrust.
Pallet Stopper
Acts as a rigid stop for incoming pallets, using the twin-rod design to absorb the side load without deflection.
FAQ
What is the push thrust of this 25mm bore TN cylinder?
At 0.5 MPa, the push thrust is 490.9 N. The push side provides higher force than the pull side, and we confirm exact figures from the datasheet.
How does the bumper on this cylinder work?
It uses an external bumper pad that cushions impact and allows stroke adjustment over a range of -5 to 0 mm, rather than an internal air cushion.