Airtac TN Double Axis Double Rod Cylinder TN25X45S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X45S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X45S
The AirTAC TN25X45S is a double-acting twin-rod cylinder with a 25 mm bore and a 45 mm stroke. Two parallel rods on a shared plate resist bending and twisting, keeping the load from rotating during travel. At 0.5 MPa the theoretical push thrust is 490.9 N, and an external bumper cushions impact while allowing stroke adjustment from -5 to 0 mm.
This is a genuine AirTAC part built to the enterprise standard. A magnet is standard on every unit, with switch slots around the body. We confirm overall dimensions and sizing details from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X45S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X45S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 25 delivers a theoretical push thrust of 490.9 N at 0.5 MPa (pull is lower). The TN series follows the enterprise standard and provides PT thread only. Stroke 45 mm is within the bore 25 range; keep the stroke-to-cover ratio reasonable to limit side-load effects. Contact us to confirm allowable side-load values from the published curves.
Applications
Transfer Arm
Shifts parts laterally between two conveyor lanes; the twin rods keep the transfer finger aligned so parts seat correctly at the destination.
Lift Gate Actuator
Raises a small sorting flap in a divert chute; the twin-rod design holds the flap horizontal under load without twisting.
Press Insert Tool
Drives a pin into a housing on an assembly line; two rods keep the insertion head square to the part for consistent seating depth.
FAQ
Why is the magnet not an option I choose?
The entire TN series is magnet-fitted as standard. Switch slots are built into the body, so every TN25X45S ships ready for magnetic switches without an add-on.
What side load can the cylinder handle?
Allowable side load is published only as curves against stroke and load position. Contact us to confirm the figure for your mounting arrangement from the datasheet.