Airtac TN Double Axis Double Rod Cylinder TN25X55S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X55S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X55S
The TN25X55S is a double-acting twin-rod cylinder: two parallel rods on one shared plate give the load resistance to bending and twisting, and the plate mounts the work directly without rotating. This model pairs a 25 mm bore with a 55 mm stroke, producing a theoretical push thrust of about 490.9 N per side at 0.5 MPa (pull-side force is lower). A bumper at the front cushions stroke-end impact and doubles as a stroke adjuster over -5 to 0 mm.
You are buying a genuine AirTAC part in the TN series, built to the ENTERPRISE standard with PT threads. The magnet comes fitted as standard, with magnetic-switch slots around the body, and mounting is embedded fixed style with three-side holes on the plate and multi-face holes on the body. Overall dimensions depend on stroke, so confirm them from the datasheet - or ask us and we will check the sizing for you.
Airtac TN Double Axis Double Rod Cylinder TN25X55S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X55S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
At 25 mm bore this cylinder gives about 490.9 N of push per side at 0.5 MPa; if your load needs less force, a 16 or 20 mm bore costs less, while a 32 mm bore gives more. The 55 mm stroke sits inside this bore's stroke table, but avoid over-long strokes, which reduce lateral rigidity - keep to the published options. Remember TN is a PT-thread, enterprise-standard series; for G or NPT threads or TR's higher-precision guide (higher non-rotating accuracy, low rod-end deflection, lengthening sliding support), choose the JIS-standard TR series. Side-load limits are published only as curves, so route your application to us for confirmation against the datasheet.
Applications
Small lift-and-lower eject on a press bench
The twin-rod plate lifts finished parts clear of a nest at the end of a cycle; the two rods stop the plate from tilting as the load shifts, and the bumper cushions the return.
Side clamp for welding fixtures
The non-rotating plate clamps sheet-metal panels against a fixture, holding alignment through weld spatter and heat where a rotating single-rod clamp would drift.
Product stopper at a filling line gate
The plate extends across a conveyor to hold containers at a filling station, taking repeated container impacts without rotating out of square.
FAQ
What does the TN25X55S model code tell me?
TN is the enterprise-standard twin-rod series (PT threads only, bores 10 to 32 mm); 25 is the bore in mm; 55 is the stroke in mm; and S means the magnet is fitted, which is standard across the whole series - there is no non-magnetic version to choose. At 0.5 MPa the theoretical push thrust is about 490.9 N per side.
Can this cylinder handle side loads on the plate?
The twin-rod design resists bending and twisting far better than a single-rod cylinder, but the allowable side load and rod-end deflection are published only as curves, not single numbers. Send us your load case and we will confirm suitability from the datasheet.