Airtac TN Double Axis Double Rod Cylinder TN25X75S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X75S is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X75S
The AirTAC TN25X75S is a double-acting twin-rod cylinder with a 25mm bore and 75mm stroke. Two parallel guide rods on a shared plate prevent the load from twisting or rotating during travel, letting the mount move straight without a separate guide rail. At 0.5 MPa this bore provides about 490.9 N of push thrust, and the external bumper cushion absorbs impact while allowing -5 to 0 mm of stroke adjustment.
This genuine AirTAC part is built to enterprise-standard dimensions with PT-thread ports. A sintered NdFeB magnet is standard on every cylinder, with magnetic-switch slots around the body. Typical materials include an aluminium-alloy body, NBR seals, and a TPU/POM bumper; we confirm bore-specific rod and seal details from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X75S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X75S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Select the 25mm bore when your load needs roughly 490.9 N of push thrust at 0.5 MPa. The TN series uses enterprise-standard dimensions and PT ports only; for JIS-standard mounting with a lengthening sliding guide delivering higher non-rotating precision, plus G or NPT thread options, see the TR series. Keep the 75mm stroke within the catalogue range for this bore - the short-cover TN body is not designed for excessive overhang. We confirm side-load capacity and deflection from the datasheet on request.
Applications
Side-Transfer Pusher Between Belts
Pushes parts from one belt to a parallel belt in a sorting cell. Twin rods keep the pusher finger perpendicular to the belt so parts transfer cleanly without skewing.
Adjustable-Stroke Ejector
Ejects finished parts from a test fixture. The bumper cushion lets the operator trim the eject stroke by up to 5 mm to match different part lengths without changing the cylinder mount.
Gripping Lift for Tray Handling
Lowers a gripper to pick a tray, then lifts it to a stack position. The twin rods keep the gripper platform level throughout the 75mm travel without a separate guide bushing.
FAQ
Is the magnet optional on the TN25X75S?
No. The S in the code indicates a magnet-fitted cylinder, and the entire TN series is magnet-fitted as standard. There is no non-magnetic option. Switch slots are machined around the body for drop-in sensor installation.
What side-load can the TN25 cylinder handle?
Allowable side-load and rod-end deflection are published as curves in the datasheet and depend on stroke length and mounting orientation. We do not state a single number here; contact us to confirm the values for your specific 75mm stroke application before ordering.