Airtac TN Double Axis Double Rod Cylinder TN25X75SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X75SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X75SH
The AirTAC TN25X75SH is a double-acting twin-rod cylinder with a 25 mm bore and 75 mm stroke. Two parallel rods on one shared plate resist bending and twisting so the load travels without rotating. At 0.5 MPa the push thrust is about 490.9 N; pull is lower. An external bumper cushions impact and adjusts the stroke over a -5 to 0 mm range.
This is a genuine AirTAC part built to the enterprise standard. A sintered NdFeB magnet is standard on every model, with switch slots around the body. We confirm dimensions, rod diameter and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X75SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X75SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Choose the 25 mm bore when you need about 490.9 N of push thrust at 0.5 MPa. The TN series meets the enterprise standard and uses PT thread only; for JIS-standard port options (G or NPT) or higher non-rotating precision, consider the TR series. The 75 mm stroke sits within the bore 25 range. Avoid over-long strokes with the short cover as they raise side-load risk. We confirm the allowable side-load from the datasheet on request.
Applications
Pusher Station
Mounts on a conveyor line to push diverted parts sideways between lanes. The twin rods keep the pusher face parallel under off-center loads, preventing skew.
Clamp Fixture
Holds a workpiece flat against a machining stop. Anti-rotation keeps the clamp pressure even across the part surface through the full 75 mm travel.
Lift-and-Place
Raises a small component from a feed tray to an assembly station. The twin-guide rods handle the weight without rod deflection over the 75 mm lift.
FAQ
What is the difference between the TN and TR twin-rod cylinders?
TN meets the enterprise standard and uses PT thread only. TR meets the JIS standard, offers PT, G and NPT threads, and adds a lengthening sliding-support guide for higher non-rotating precision and lower rod-end deflection. Both are double-acting twin-rod cylinders with a standard magnet.
How does the bumper cushion work on this cylinder?
The TN25X75SH uses an external bumper pad at the front, not an air cushion. The bumper cushions impact and also adjusts the effective stroke over a -5 to 0 mm range. We confirm dimensions and the adjustment details from the datasheet on request.