Airtac TN Double Axis Double Rod Cylinder TN25X80SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X80SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X80SH
The AirTAC TN25X80SH is a double-acting twin-rod cylinder with a 25 mm bore and an 80 mm stroke. Two parallel rods on one shared plate resist bending and twisting so the load moves without rotation. At 0.5 MPa the push thrust is 490.9 N (pull side is lower), and the external bumper cushions impact while allowing a -5 to 0 mm stroke adjustment.
This is a genuine AirTAC part meeting the enterprise standard. A magnet is standard on every unit, with switch slots around the body for sensor mounting. We confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X80SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X80SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 25 mm bore gives 490.9 N push thrust at 0.5 MPa; choose the bore that matches your force need, then the stroke from the bore's table. TN is the enterprise-standard twin-rod line with PT thread only; for JIS mounting, higher non-rotating precision, a lengthening sliding guide, and PT/G/NPT thread options, consider the TR series instead. Keep the stroke within the bore's published range to avoid over-extending the short-cover guide; contact us to confirm allowable side-load for your mounting geometry.
Applications
Inline Pusher Station
Pushes parts flat down a conveyor lane with the twin rods keeping the pusher face square so the workpiece does not skew or jam.
Pick-and-Place Lift
Raises and lowers a gripper between two heights; the anti-rotation rods hold the tool plate level without a separate guide bushing.
Pneumatic Stopper Gate
Extends a stop blade across a transfer track to halt pallets, then retracts flush; the twin rods absorb repeated side impact without bending.
FAQ
What thrust does the TN25 bore produce, and how does TN differ from TR?
At 0.5 MPa the 25 mm bore push thrust is 490.9 N (pull is lower). TN is the enterprise-standard line with PT thread only; TR is the JIS-standard twin-rod with higher non-rotating precision, a lengthening sliding guide, and PT, G, or NPT thread options.
How is the cushion different from an air cushion, and can I adjust stroke?
The TN series uses an external bumper pad, not an internal air cushion. The bumper absorbs impact and also lets you trim the end-of-stroke position by -5 to 0 mm. For allowable side-load and exact envelope dimensions, we confirm from the datasheet.