Airtac TN Double Axis Double Rod Cylinder TN25X90SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN25X90SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 25 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 490.9 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore25 mm
- Push thrust @0.5 MPa490.9 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port sizeM5x0.8
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN25X90SH
A twin-rod double-acting cylinder uses two parallel rods on a shared plate to resist bending and twisting, letting the load mount without rotating. For the TN25X90SH with its 25mm bore and 90mm stroke, this delivers a 490.9 N theoretical push thrust at 0.5 MPa, with an external bumper that cushions impact and adjusts stroke over -5 to 0 mm.
This is a genuine AirTAC part meeting the enterprise standard. A sintered NdFeB magnet is standard for position sensing, with switch slots around the body. We confirm exact dimensions, rod size and side-load limits from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN25X90SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN25X90SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 490.9 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore choice sets thrust: the 25mm bore here provides 490.9 N push thrust at 0.5 MPa, so size it to your load. This TN series meets the enterprise standard with PT ports only; the TR series offers JIS standard, PT/G/NPT ports and a precise guide with higher non-rotating accuracy. Select stroke within the bore table but avoid over-long strokes on the short cover to prevent deflection. Route specific side-load questions to us.
Applications
Conveyor Stopper
Use the twin rods to stop flat cartons or trays on a belt line squarely without skewing or rotating the load.
Component Clamping
Apply steady anti-rotation clamping force to hold a flat workpiece for machining or assembly without rod twist.
Vertical Lift
Lift and lower a light gauge or tray precisely, with the twin guides providing side stability against bending.
FAQ
What thrust does this 25mm bore cylinder provide?
The TN25X90SH provides a theoretical push thrust of 490.9 N at 0.5 MPa. The pull side thrust is lower due to the rod area.
Where do I confirm side-load limits and dimensions?
Route side-load questions and exact dimensions to us; we confirm them from the datasheet on request.