Airtac TN Double Axis Double Rod Cylinder TN32X100SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X100SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X100SH
The TN32X100SH is a twin-rod, double-acting cylinder: two pistons and two parallel rods move one shared plate that carries the load without rotating and resists bending and twisting. At 32 mm bore and 100 mm stroke, the push side develops about 804 N of theoretical thrust at 0.5 MPa, with the external front bumper cushioning end-of-stroke impact and adjusting the effective stroke over -5 to 0 mm.
This is a genuine AirTAC TN-series (Enterprise standard) part with the magnet fitted as standard and magnetic-switch slots around the body, running on 40 um filtered air at 0.15-1.0 MPa (22-145 psi), -20 to 70 C, 30-500 mm/s. The trailing H is not one of the standard TN thread codes, so we confirm the exact port connection from the datasheet before you order; dimensions and side-load curves are also confirmed from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X100SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X100SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 gives about 804 N push at 0.5 MPa (push higher than pull), and the 100 mm stroke sits within this bore's table - size both on the force and travel your fixture needs. Note that TN is the Enterprise-standard series and is PT thread only; TR is the JIS-standard twin-rod series with PT/G/NPT options, higher non-rotating precision, a lengthening sliding-support guide and ports on both sides, so move to TR if your plumbing or accuracy demands differ. Because the H suffix here is not a standard TN thread code, confirm the connection with us, and keep strokes within the table - long twin-rod strokes raise rod-end deflection, with side-load limits published as curves in the datasheet.
Applications
Indexing stopper on an assembly line
The plate pops up from a pallet conveyor to stop each pallet at the work station; the bumper cushions the stop and switch slots confirm the up and down positions.
Pallet-positioning platen
The non-rotating plate squares up pallets or stillages before strapping, using the twin-rod guide to keep the platen level across the 100 mm travel.
Machine ejection station
The plate ejects formed parts from a press die without rotating, so parts stay oriented as they drop into the collection chute.
FAQ
The code ends in SH - what thread does TN32X100SH have?
The S marks the standard magnet and the trailing H is not one of the standard TN thread codes; the TN series itself is PT only. Send us the code and we confirm the exact port connection from the datasheet before you order, so there is no guesswork at installation.
Why pick a twin-rod cylinder over a single-rod one here?
The two parallel rods share the load and keep the mounting plate from rotating, so the plate resists bending and twisting without extra external guide rails. That makes it a compact choice for pushers, clamps, stoppers and lifts where the plate itself must stay square.