Airtac TN Double Axis Double Rod Cylinder TN32X10SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X10SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X10SH
A double-acting twin-rod cylinder puts two parallel rods under one shared plate, so the plate resists bending and twisting and the load mounts without rotating. This 32mm bore, 10mm stroke unit is made for tight, high-force moves: at 0.5 MPa it produces a theoretical push thrust of 804.2 N (pull side is lower), and the front bumper cushions impact while adjusting effective stroke over -5 to 0 mm.
It is a genuine AirTAC part to the TN enterprise standard, with PT thread ports (1/8 in. on bore 32) and a magnet fitted as standard for switch-based position detection. Operating envelope: air filtered to 40 um, 0.15-1.0 MPa (22-145 psi), -20 to 70 C, 30-500 mm/s. Note that the trailing H suffix is an extra code beyond the standard S/thread format, so we confirm the exact variant detail from the datasheet before you order.
Airtac TN Double Axis Double Rod Cylinder TN32X10SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X10SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 32mm bore delivers 804.2 N theoretical push at 0.5 MPa; choose a 20 or 25mm bore if the application needs less. Within the twin-rod range, this is enterprise-standard TN with PT thread only, while JIS-standard TR offers G and NPT threads plus higher non-rotating precision and a lengthening sliding-support guide needing no added lubricant. Before ordering TN32X10SH, confirm the meaning of the H suffix with us or from the datasheet - and keep strokes as short as the job allows, routing side-load questions to us for confirmation against the datasheet curves.
Applications
Fixture clamp on a machining station
Holds a workpiece down during drilling or milling. The 10mm stroke is enough to clear loading and re-clamp, the non-rotating plate keeps clamp force square, and the 32mm bore applies 804.2 N of push at 0.5 MPa.
Product stop on a packaging line
Gates bottles or cartons at a filling or labeling head. The twin rods stop the plate from rotating under off-center products, so the stop face stays aligned, and the bumper absorbs each impact over the last 5mm of travel.
Chute divert and reject push-off
Kicks rejected parts off a inspection conveyor into a bin. The 32mm bore gives the shove, the 10mm stroke keeps the mechanism compact, and the twin-rod plate pushes without twisting even on irregular parts.
FAQ
How do I decode TN32X10SH, and what does the H mean?
Reading the code: TN is the enterprise-standard twin-rod series, 32 is the bore in mm, 10 is the stroke in mm, and S marks the magnet, which is fitted as standard on the whole series. The trailing H is an extra suffix beyond the standard S/thread decode, so confirm its exact variant meaning with us or from the datasheet before ordering. Thread on this TN model is PT.
Will the mounting plate stay level under an unbalanced load?
Yes in the sense that matters most: the two parallel rods share the load, so the plate resists twisting and mounts the part without rotating. Exact allowable side-load and rod-end deflection values are published as curves, not single numbers - send us your arrangement and we confirm them from the datasheet. The adjustable bumper also trims effective stroke over -5 to 0 mm.