Airtac TN Double Axis Double Rod Cylinder TN32X125SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X125SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X125SH
The TN32X125SH is a double-acting twin-rod cylinder: two rods run in parallel on one shared plate, so the load mounts on the plate without rotating and the assembly resists bending and twisting. With a 32 mm bore and 125 mm stroke, it delivers a theoretical push thrust of about 804.2 N at 0.5 MPa (the push side is higher than the pull side). Cushioning comes from an external bumper pad that both softens impact and adjusts the effective stroke over a -5 to 0 mm range - it is a bumper, not an air cushion.
This is a genuine AirTAC part built to the TN enterprise standard, with PT thread ports and a 1/8 in. port size on the 32 mm bore. A magnet is fitted as standard on every TN cylinder, with magnetic-switch slots around the body - there is no non-magnetic variant to choose. Operating pressure for this bore is 0.15-1.0 MPa (22-145 psi), the medium is air filtered to 40 um, and the temperature range is -20 to 70 C. We confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X125SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X125SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Pick the 32 mm bore when your station needs roughly 804.2 N of push thrust at 0.5 MPa; smaller bores deliver less. If you need higher non-rotating accuracy and low rod-end deflection, step up to the JIS-standard TR series, which also adds a lengthening sliding-support guide needing no added lubricant and two groups of ports, one on each side. The TN series is the enterprise-standard choice, with PT as its only thread option; G and NPT threads are available on TR only. Confirm the 125 mm stroke against the bore's stroke table in the datasheet, and be cautious with over-long strokes on this bore - check the limits before you specify. For side-load capability, send us your figures and we will confirm from the published curves.
Applications
Carton push-off on a packaging line
Mounted across a conveyor, the 125 mm stroke sweeps cartons from the main belt into a divert or reject lane; the shared plate stays square to the product so the push lands flat.
Vertical lift of a light fixture plate
Plumbed downward, the twin rods raise and lower a small fixture or guarding plate through its 125 mm travel; the plate resists racking where a single rod would twist.
Straight-line clamp on a welding jig
Used as a linear clamp, the cylinder holds a bracket down against the jig; the anti-rotation plate keeps the clamping tip aligned cycle after cycle.
FAQ
Is the magnet in the TN32X125SH an optional add-on?
No. Every TN-series cylinder, including the TN32X125SH, is fitted with a magnet as standard and has magnetic-switch slots around the body. There is no non-magnetic version to select.
How much side load can the twin rods take?
The two parallel rods resist twisting of the mounting plate, but allowable side load and rod-end deflection are published only as curves. Confirm the figures for your stroke from the datasheet, or send us your load case and we will check it for you.