Airtac TN Double Axis Double Rod Cylinder TN32X150SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X150SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X150SH
The TN32X150SH is a double-acting twin-rod cylinder: two pistons and two parallel rods share one plate, so the load mounts on the plate without rotating and with strong resistance to bending and twisting. At the 32 mm bore, the push side delivers a theoretical 804 N at 0.5 MPa (the pull side is lower), giving firm pushing, clamping and stopping force over the 150 mm stroke. An external bumper pad cushions end-of-stroke impact and adjusts the effective stroke over -5 to 0 mm; it is a bumper, not an air cushion.
This is a genuine AirTAC part in the ENTERPRISE-standard TN series, with PT ports (1/8 in) and a position magnet fitted as standard, with magnetic-switch slots around the body. Operating range is 0.15-1.0 MPa (22-145 psi) on air filtered to 40 um, at -20 to 70 C. We confirm the exact content of the trailing H suffix, along with weight and stroke-specific dimensions, from the datasheet before you order.
Airtac TN Double Axis Double Rod Cylinder TN32X150SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X150SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 32 mm bore gives a theoretical push thrust of 804 N at 0.5 MPa; step down a bore size if your load needs less force. TN is the ENTERPRISE-standard twin-rod series with PT threads only; for G or NPT ports, or for TR's precise guide with higher non-rotating accuracy, low rod-end deflection, a lengthening sliding-support guide and two groups of ports on both sides, choose the JIS-standard TR series. The 150 mm stroke is within the TN 32 bore table, but avoid over-long strokes relative to the cover length - confirm the drawing from the datasheet. Allowable side load is published only as curves, so route your application to us for sizing.
Applications
Machine-tool part clamp
Use the wide plate as a clamp shoe to hold workpieces on a CNC fixture or secondary-operation bench. The twin rods prevent the pad from rotating, keeping clamp force applied exactly where it is set.
Case diverter on a sorter
Mount the plate as a diverter that sweeps cartons from one lane to another. The two parallel rods carry the bending load of the sweep, and the adjustable bumper takes the sting out of each stroke end.
Assembly-station stopper
Deploy the plate as a positive stop that indexes pallets into an assembly station. The dual-rod layout keeps the stop face perpendicular to the pallet flow through thousands of cycles.
FAQ
How is the TN32X150SH different from the TN32X150S, and how do TN and TR compare?
Both are ENTERPRISE-standard TN twin-rod cylinders with 32 mm bore, 150 mm stroke, PT thread and a standard magnet; the trailing H is a variant code whose exact content we confirm from the datasheet before ordering. TN is PT-only; if you need G or NPT threads or TR's precise guide, select the JIS-standard TR series instead.
Is the bumper an air cushion, and how much can I shorten the stroke?
No - it is an external bumper pad at the front of the cylinder. It cushions impact and also adjusts the effective stroke over -5 to 0 mm, so you can trim up to 5 mm off the 150 mm stroke without an air cushion.