Airtac TN Double Axis Double Rod Cylinder TN32X15S
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X15S is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X15S
The TN32X15S is a double-acting twin-rod cylinder: two pistons and two parallel rods share one plate, so the load mounts on the plate without rotating and with strong resistance to bending and twisting. At the 32 mm bore, the push side delivers a theoretical 804 N at 0.5 MPa (the pull side is lower), making the short 15 mm stroke ideal for tight, high-force tasks such as eject marks, small clamps or part presenters. An external bumper pad cushions end-of-stroke impact and adjusts the effective stroke over -5 to 0 mm; it is a bumper, not an air cushion.
This is a genuine AirTAC part in the ENTERPRISE-standard TN series, with PT ports (1/8 in) and a position magnet fitted as standard, with magnetic-switch slots around the body. Operating range is 0.15-1.0 MPa (22-145 psi) on air filtered to 40 um, at -20 to 70 C. Weight and stroke-specific dimensions are not listed here; we confirm them, and your sizing, from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X15S Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X15S |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
The 32 mm bore is the largest in the TN series and gives a theoretical push thrust of 804 N at 0.5 MPa; a smaller bore will do if your load needs less force. The 15 mm stroke is a short-travel option within the TN 32 bore table - good for compact fixtures, but check it against your travel requirement and the cover drawing in the datasheet. TN is the ENTERPRISE-standard twin-rod series with PT threads only; for G or NPT ports, or for TR's precise guide with higher non-rotating accuracy, low rod-end deflection and two groups of ports on both sides, pick the JIS-standard TR series. Allowable side load is published only as curves, so route your application to us and we will size it.
Applications
Compact press-fit eject
Use the short 15 mm stroke to eject a pressed bushing or pin from a fixture, or to seat a small part home. The 32 mm bore gives strong push force in a compact envelope, and the twin rods keep the plate from racking.
Small-part clamp
Mount the plate as a short-travel clamp for brackets, terminals or small housings on a welding or assembly fixture. The dual rods stop the clamp pad from twisting as pressure builds.
Lift-and-present elevator
Fit the plate under a small lift table or part nest to raise components 15 mm into a pick position. The twin rods hold the nest level without extra guide rails, and the bumper cushions the lower stop.
FAQ
Why does the TN32X15S only come with a PT thread?
The TN series is the ENTERPRISE-standard twin-rod line and is supplied with PT tapered pipe threads only, 1/8 in at the 32 mm bore. If your plant uses G or NPT fittings, the JIS-standard TR twin-rod series offers PT, G and NPT options.
What does the adjustable bumper do on this short-stroke cylinder?
The bumper is an external pad at the front of the cylinder, not an air cushion. It cushions the end-of-stroke impact and also adjusts the effective stroke over -5 to 0 mm, so you can trim the 15 mm stroke by up to 5 mm to suit the fixture.