Airtac TN Double Axis Double Rod Cylinder TN32X15SH

The TN32X15SH is a double-acting twin-rod cylinder: two parallel rods carry one shared plate, so the load mounts without rotating and the plate resists bending and twisting. With a 32 mm bore and 15 mm stroke, it gives a theoretical push thrust of 804.2 N at 0.5 MPa (both rods combined; push is higher than pull) on an air supply filtered to 40 um, at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s and -20 to 70 C. An external front bumper both cushions impact and adjusts the effective stroke over -5 to 0 mm.

This is a genuine AirTAC part built to the enterprise-standard TN series, with a positioning magnet fitted as standard and magnetic-switch slots around the body. Ports are 1/8 in. on the 32 mm bore, with embedded fixed mounting: three-side mounting holes on the plate and multi-face holes on the body. We confirm dimensions and sizing for your exact stroke from the datasheet on request.

Start with thrust: at 0.5 MPa this 32 mm bore delivers 804.2 N theoretical push on both rods, so smaller 10-25 mm bores may suit lighter clamp or push loads at lower cost. TN is the enterprise-standard twin-rod series with PT threads only; if you need G or NPT ports, or the higher non-rotating precision of the JIS-standard TR with its lengthening sliding-support guide (no added lubricant) and two groups of ports on both sides, choose TR instead. The 15 mm stroke sits at the short end of the bore's table and avoids the long-stroke short-cover check; the bumper still trims the effective stroke -5 to 0 mm. Allowable side load is published only as curves, so send us your load case and we will confirm the right bore.