Airtac TN Double Axis Double Rod Cylinder TN32X200SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X200SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X200SH
The TN32X200SH is a double-acting twin-rod cylinder from AirTAC's TN series: two parallel rods on one shared plate resist bending and twisting so the plate mounts the load without rotating. With a 32 mm bore and 200 mm stroke it delivers a theoretical push thrust of 804.2 N at 0.5 MPa (pull side is lower), and the external bumper on the front cover both cushions impact and adjusts the effective stroke over -5 to 0 mm - an adjustable bumper, not an air cushion.
This is a genuine AirTAC part meeting the TN ENTERPRISE standard, with PT thread ports, and the magnet is fitted as standard with switch slots around the body. The trailing H in the code is a suffix beyond the standard thread letters; we confirm its exact meaning, plus stroke-specific dimensions and sizing, from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X200SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X200SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
This 32 mm bore provides 804.2 N theoretical push at 0.5 MPa for demanding push, clamp or lift duty in the TN range. TN is the enterprise-standard twin-rod series with PT thread ports only; TR is the JIS-standard alternative with PT, G or NPT and a higher-precision guide if your application needs tighter anti-rotation accuracy. The 200 mm stroke comes from the TN bore table - beware the short-cover caution on over-long strokes and send us the layout to verify. Side-load limits are published as curves only, so confirm your side load with us from the datasheet.
Applications
Pallet elevator
Fitted under a pallet lift station, the twin rods raise the platform evenly over 200 mm so the load stays level and never spins on its guides.
Line transfer pusher
Mounted across a transfer conveyor, the non-rotating plate slides totes between lanes while the twin rods absorb the bending loads of an offset mount.
Fixture clamp actuator
Built into a welding or assembly fixture, the plate clamps brackets down flat, holding position without rotating as the 804.2 N push load is applied.
FAQ
What does the SH suffix mean in TN32X200SH?
The core code decodes as TN series, 32 mm bore, 200 mm stroke, S for the standard magnet, and PT thread ports (TN has no G or NPT option). The trailing H is not one of the standard thread letters, so we confirm the suffix detail from the datasheet - contact us and we will check it for you.
Can I mount my load directly on the TN32X200SH plate?
Yes. The two parallel rods on the shared plate resist bending and twisting, so the load mounts on the plate without rotating. For allowable side-load figures and exact plate dimensions at the 200 mm stroke, confirm from the datasheet - we will send it on request.