Airtac TN Double Axis Double Rod Cylinder TN32X5SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X5SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X5SH
A twin-rod cylinder uses two parallel guide rods on a shared plate to resist bending and twisting so the load moves without rotating. The TN32X5SH gives you a 32mm bore with a 5mm stroke, a very short-travel unit for clamping or holding in tight spaces. At 0.5 MPa it delivers about 402 N of push thrust on the forward side (pull is lower), and an external bumper cushions impact while adjusting the effective stroke by -5 to 0 mm.
This is a genuine AirTAC part built to the enterprise standard, with a standard magnet for position sensing and 1/8 inch ports. The H suffix is an AirTAC variant code beyond the standard bore/stroke/thread decode; we confirm the exact specification and dimensions from the datasheet before you order.
Airtac TN Double Axis Double Rod Cylinder TN32X5SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X5SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 fits jobs needing roughly 402 N push at 0.5 MPa; choose it over smaller bores when you need more clamping force in a short stroke. TN is the enterprise-standard series with PT threads only. Choose TR instead if you need JIS mounting, higher guide precision, a lengthening sliding guide, or G/NPT thread options. The 5mm stroke sits well within the bore's rated range; confirm the H variant details and allowable side-load with us before ordering.
Applications
Hold-Down Clamp
Presses a part flat against a tooling plate for a secondary operation. Twin rods keep the clamp face parallel so pressure distributes evenly across the workpiece.
Lane Diverter
Pushes a diverter blade 5mm to nudge parts from one conveyor lane to another. The short stroke and anti-rotation guide keep the blade from cocking under side load.
Indexing Stop
Blocks a moving pallet at a workstation, then retracts 5mm to release it. Twin-rod rigidity keeps the stop face perpendicular so the pallet seats correctly.
FAQ
What does the H suffix mean on TN32X5SH?
The H suffix is an AirTAC variant code beyond the standard bore/stroke/thread decode. The 32mm bore, 5mm stroke, and magnet are standard, but the exact meaning of H should be confirmed from the datasheet before ordering.
Is the magnet optional on this model?
No. The whole TN series is magnet-fitted as standard, so the S in the code is always present. There is no non-magnetic option to choose; magnetic-switch slots are built around the body.