Airtac TN Double Axis Double Rod Cylinder TN32X80SH
The AirTAC Airtac TN Double Axis Double Rod Cylinder TN32X80SH is a genuine TN twin-rod (double-rod) double-acting cylinder, 32 mm bore. Two parallel rods on one plate resist bending and twisting and let the load mount without rotating. It delivers about 804.3 N of push at 0.5 MPa. A front bumper cushions the impact and adjusts the stroke over a -5 to 0 mm range.
- TypeTwin-rod, double acting
- Standardenterprise standard
- Bore32 mm
- Push thrust @0.5 MPa804.3 N
- Operating pressure0.15 - 1.0 MPa (22 - 145 psi)
- Port size1/8"
- CushionAdjustable bumper (-5 to 0 mm)
- MagnetStandard (sensor-ready)
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TN Double Axis Double Rod Cylinder TN32X80SH
The AirTAC TN32 is a twin-rod, double-acting cylinder with a 32 mm bore and an 80 mm stroke. Two parallel rods share one plate, giving resistance to bending and twisting so the load moves without rotating. At 0.5 MPa the theoretical push thrust is 804.2 N. Impact is absorbed by an external bumper that also trims the effective stroke over a -5 to 0 mm range.
This is a genuine AirTAC part meeting the enterprise standard. A magnet is standard on every unit for position sensing, with magnetic-switch slots around the body. We confirm exact dimensions and sizing from the datasheet on request.
Airtac TN Double Axis Double Rod Cylinder TN32X80SH Technical Specifications
| Model | Airtac TN Double Axis Double Rod Cylinder TN32X80SH |
|---|---|
| Type | Twin-rod cylinder, double acting |
| Series / standard | TN (enterprise standard) |
| Bore | 32 mm |
| Push thrust @0.5 MPa | 804.3 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to 70 C |
| Speed range | 30 - 500 mm/s |
| Cushion | Bumper, stroke adjustable -5 to 0 mm |
| Magnet | Standard (magnetic-switch slots around the body) |
Specifications follow the official AirTAC TN/TR twin-rod data. Operating pressure is set by bore (0.2 MPa minimum on the 6 and 10 mm bores). The front cover and piston are short, so avoid an over-long stroke. Overall dimensions vary per stroke and allowable side-load is published as curves — ask us and we confirm from the datasheet.
How to choose
Bore 32 gives the highest thrust in the TN range - 804.2 N push at 0.5 MPa - so choose it when power matters more than footprint. TN follows the enterprise standard and offers PT thread only; for JIS dimensions, port options (PT/G/NPT), and higher non-rotating precision, select the TR series instead. Keep the stroke within the table for this bore, because long strokes on the short cover can cause excess rod-end deflection. We confirm allowable side load from the datasheet curves on request.
Applications
Workpiece Clamping
Holds a casting or forging firmly against a machining fixture. The twin rods keep the clamp face parallel and prevent it from rotating under cutting load.
Transfer Pusher
Pushes parts from one conveyor lane to another at a transfer station. The dual rods maintain push alignment so the workpiece does not skew sideways.
Pallet Stopper
Stops an incoming pallet at a pick position on a roller conveyor. The adjustable bumper absorbs the impact while the twin rods keep the stop plate level.
FAQ
What is the push thrust of the TN32 bore at 0.5 MPa?
The theoretical push thrust at 0.5 MPa is 804.2 N. The pull side is lower because the rod area is subtracted from the piston face on the return stroke.
How does the bumper work on this cylinder?
The cylinder uses an external bumper pad at the front that both cushions end-of-stroke impact and lets you trim the effective stroke over a -5 to 0 mm range. It is not an air cushion.