Airtac ACE Compact Cylinder ACE25X60B
The AirTAC Airtac ACE Compact Cylinder ACE25X60B is a genuine double acting ISO 21287 compact air cylinder with a Ø25mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE25X60B
This AirTAC ACE25X60B is a double acting ISO 21287 compact cylinder with a 25 mm bore and a 60 mm stroke, delivering a 245.4 N push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it tucks into tight machine frames where a full-length unit will not fit.
With a male rod thread (B code) and no magnet fitted, this unit is ready for direct mechanical linkage but cannot trigger CMSE or DMSE sensors unless you order the optional -S magnet. For a 2:1 safety margin on vertical moves, plan to lift about 12.5 kg (245.4 N divided by 9.81, then halved), and keep real working loads near 147 N at 0.5 MPa.
Airtac ACE Compact Cylinder ACE25X60B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE25X60B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE25X60B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE25X60B Is Used
Jig Clamping
Use the 245.4 N push to clamp thin aluminium panels in a CNC drilling jig, where the short body clears the spindle guard.
Label Applicator
Drive a 60 mm stroke label tamp head on a carton sealing line, with the male rod thread securing a custom pad.
Small Parts Ejector
Eject molded plastic caps from a two-cavity die, relying on the 206.2 N pull stroke to retract the ejector pin.
Is the Airtac ACE Compact Cylinder ACE25X60B the Right Cylinder?
For lighter duty, the ACE20X60 offers 157.1 N push at 0.5 MPa, while stepping up to the ACE32X60 gives 402.1 N push for heavier fixtures. Since this model has no magnet, choose the ACE25X60SB if you need to add CMSE or DMSE switches later. The male rod thread suits clevis or knuckle mounts, and the M5x0.8 port matches small-bore air prep units.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE25X60B FAQ
At 0.5 MPa, push is 245.4 N and pull is 206.2 N. At 0.7 MPa, push is 343.6 N and pull is 288.6 N. The theoretical maximum force at 1.0 MPa is 50.1 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi).
No, this ACE25X60B has no magnet because the -S code was not ordered. To use CMSE or DMSE reed or solid-state switches, you must order the ACE25X60SB version with the optional -S magnet. The fixed TPU bumper at both ends handles end-of-stroke impact, but it does not lock the rod in position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE25X60B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.