Airtac ACE Compact Cylinder ACE25X60SB
The AirTAC Airtac ACE Compact Cylinder ACE25X60SB is a genuine double acting ISO 21287 compact air cylinder with a Ø25mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE25X60SB
This AirTAC ACE25X60SB is a double acting compact cylinder that extends and retracts its 10 mm rod with air pressure on both strokes. With a 25 mm bore it delivers 245.4 N of push force and 206.2 N of pull force at 0.5 MPa, making it a solid choice for light assembly tasks.
The ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, so it tucks into tight jigs and guards. The male rod thread (B code) simplifies mounting, and the optional -S magnet is fitted here, so CMSE or DMSE switches can sense the piston position. For a real workload, plan on roughly 15 kg of safe vertical lift at 0.5 MPa, keeping a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE25X60SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE25X60SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE25X60SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE25X60SB Is Used
Jig Clamping
Clamp small parts in a CNC fixture with 245.4 N push force, using the compact body to fit under a workholding plate.
Label Applicator
Drive a label applicator head on a packaging line with 60 mm stroke and 206.2 N pull, keeping the cycle time within 30-500 mm/s.
Guard Door Actuator
Open a light machine guard or access door with the 25 mm bore, where the short ISO 21287 body saves space on the frame.
Is the Airtac ACE Compact Cylinder ACE25X60SB the Right Cylinder?
For a lighter push, the 20 mm bore ACE20X60 offers 157.1 N at 0.5 MPa, while stepping up to a 32 mm bore ACE32X60 gives 402.1 N. This 25 mm size balances force and footprint for medium-duty fixtures. Since the rod is male-threaded, you can directly attach a clevis or rod end. The fitted magnet allows position sensing with CMSE or DMSE switches, but remember this cylinder does not hold its load if air pressure is lost; use a rod lock or pilot check valve for safety.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE25X60SB FAQ
At 0.5 MPa, push force is 245.4 N and pull is 206.2 N. At 0.7 MPa, push rises to 343.6 N and pull to 288.6 N. The theoretical maximum force is 50.1 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
The hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, saving mounting length in tight spaces. It has a fixed TPU bumper at both ends to absorb impact, and the optional -S magnet is fitted here, allowing CMSE or DMSE switches to detect piston position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE25X60SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.