Airtac ACE Compact Cylinder ACE32X10
The AirTAC Airtac ACE Compact Cylinder ACE32X10 is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X10
This AirTAC ACE32X10 is a double acting compact cylinder built to ISO 21287, with a 32 mm bore and a 10 mm stroke. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames where a full-length cylinder would not. The 12 mm rod is hard-chrome plated S45C steel, and the fixed TPU bumper at each end absorbs end-of-stroke impact.
At 0.5 MPa this unit delivers 402.1 N of push force and 345.6 N of pull force, which is enough to clamp small parts or index a light fixture. For a safe working load, plan for about 241 N of real work at 0.5 MPa, not the full rating. This model has no magnet fitted, so it cannot accept CMSE or DMSE sensors unless you order the optional -S code.
Airtac ACE Compact Cylinder ACE32X10 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X10 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X10
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X10 Is Used
Jig Clamping
Use the ACE32X10 to clamp a workpiece in a CNC fixture. The 402.1 N push force holds small aluminum parts securely, and the short body fits under a low-profile clamp arm.
Parts Ejection
In an assembly station, mount this cylinder to push a finished component off a locating pin. The 10 mm stroke is enough to clear the part, and the fixed TPU bumper prevents noisy end-of-stroke impact.
Gate Stop
On a small conveyor, use the ACE32X10 to raise a stop gate that blocks a box. The 345.6 N pull force retracts the gate quickly, and the compact body mounts easily under the conveyor frame.
Is the Airtac ACE Compact Cylinder ACE32X10 the Right Cylinder?
For a lighter load, the ACE25X10 with 245.4 N push at 0.5 MPa is a smaller option, while the ACE40X10 with 628.3 N push handles heavier work. Since this is a short-stroke unit, it suits quick actuations like clamping or ejection rather than long transfers. If you need position sensing, remember to order the -S magnet version; without it, no sensor can be mounted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X10 FAQ
At 0.5 MPa, the push force is 402.1 N and the pull force is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
No, this ACE32X10 has no magnet fitted, so CMSE or DMSE switches cannot be used. To enable sensor mounting, you must order the model with the optional -S code, which adds the built-in magnet. The cylinder body has magnet slots for the switches once the -S version is selected.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.