Airtac ACE Compact Cylinder ACE32X10B
The AirTAC Airtac ACE Compact Cylinder ACE32X10B is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X10B
This AirTAC ACE32X10B is a double acting ISO 21287 compact cylinder with a 32 mm bore and 10 mm stroke, delivering 402.1 N of push force at 0.5 MPa. Its hard-anodized aluminium body and S45C hard-chrome plated rod are built for repeated cycles in tight automation cells.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits inside guarding and compact jigs where a full-length cylinder will not. With a male rod thread (B code), it mounts directly to linkages without a rod-end adapter. For a safe working load, plan for about 241 N of real work at 0.5 MPa, which lifts roughly 24.6 kg vertically with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE32X10B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X10B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X10B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X10B Is Used
Fixture Clamping
Use in a CNC fixture to clamp small aluminium parts with 402.1 N force at 0.5 MPa, holding them securely during drilling operations.
Label Applicator
Drive a label tamp head in a packaging line, where the short 10 mm stroke cycles quickly to apply labels to cartons at speeds up to 500 mm/s.
Test Probe Actuator
Actuate a test probe in an electronics assembly station, pushing the probe against a PCB with a controlled force for continuity checks.
Is the Airtac ACE Compact Cylinder ACE32X10B the Right Cylinder?
For a lighter duty, the ACE25X10 offers 245.4 N push at 0.5 MPa, while the ACE40X10 steps up to 628.3 N push. This 32 mm bore suits medium-force clamping or pressing in small fixtures. Since this model has no -S code, it has no magnet, so CMSE or DMSE sensors cannot be used unless you order the optional -S version. Mount with FA/FB flange, LB foot, or CA/CB clevis brackets for standard ISO 21287 interfaces.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X10B FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563.0 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), with proof pressure at 1.5 MPa (215 psi).
The ISO 21287 design uses a short, hard-anodized aluminium body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. This model has no magnet because it lacks the -S option, so CMSE or DMSE sensors cannot be mounted. Order the ACE32X10BS version to get the optional magnet for sensor feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.