Airtac ACE Compact Cylinder ACE32X10S
The AirTAC Airtac ACE Compact Cylinder ACE32X10S is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X10S
This AirTAC ACE32X10S is a double acting ISO 21287 compact cylinder delivering 402.1 N push and 345.6 N pull at 0.5 MPa. Its short body takes up about 50% less mounting length than an ISO 15552 profile cylinder, making it ideal for tight automation cells.
The 32 mm bore unit has a hard-anodized aluminium body and a hard-chrome plated S45C steel rod for long service life. With the optional -S magnet fitted, it works with CMSE or DMSE switches for position sensing. For real work, plan on roughly 24.6 kg of usable force at 0.5 MPa, which is about 60% of the rated thrust, to account for friction and safety margins.
Airtac ACE Compact Cylinder ACE32X10S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X10S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X10S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X10S Is Used
PCB Staking Press
Short 10 mm stroke presses connector pins into printed circuit boards with 402.1 N force at 0.5 MPa, fitting inside a compact assembly station.
Label Applicator
Applies labels to small pharmaceutical vials on a conveyor, using the magnet with a DMSE switch to confirm each cycle completes.
Fixture Clamp
Clamps small aluminium parts in a CNC vise during drilling operations, with the short body fitting under a low machine guard.
Is the Airtac ACE Compact Cylinder ACE32X10S the Right Cylinder?
For lighter duty, the ACE25 series offers 245.4 N push at 0.5 MPa, while stepping up to the ACE40 provides 628.3 N push. This 10 mm stroke version suits short-travel pick-and-place operations where space is limited. The 1/8" port matches standard fittings for 32 mm bore cylinders. Since the magnet is fitted, you can add CMSE or DMSE sensors without modifying the cylinder. For applications requiring load holding when air is removed, add an external pilot check valve or rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X10S FAQ
At 0.5 MPa, push force is 402.1 N and pull force is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. Theoretical maximum force at 1.0 MPa is 82 kgf.
The body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight jigs and guarded areas. The fixed TPU bumper at both ends absorbs impact at the stroke limits, and the optional -S magnet allows CMSE or DMSE sensors to detect rod position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.