Airtac ACE Compact Cylinder ACE32X10SB
The AirTAC Airtac ACE Compact Cylinder ACE32X10SB is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X10SB
This AirTAC ACE32X10SB is a double acting ISO 21287 compact cylinder with a 32 mm bore and a 10 mm stroke. It delivers a 402.1 N push force and a 345.6 N pull force at 0.5 MPa, with a fixed TPU bumper at both ends to absorb end-of-stroke impact. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, making it ideal for tight spaces.
This model includes the optional -S magnet, so you can mount CMSE or DMSE reed or solid-state switches for position sensing. The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in demanding cycles. For a safe working load, plan for about 241 N (roughly 24.6 kg) of real work at 0.5 MPa, not the full rating, to ensure reliable performance.
Airtac ACE Compact Cylinder ACE32X10SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X10SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X10SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X10SB Is Used
Short-Stroke Clamping
Use in a jig to clamp small parts during drilling or assembly on a benchtop workstation, where the compact body fits under a guard.
Packaging Line Stop
Act as a stop gate on a conveyor to hold lightweight cartons before labeling, with the 10 mm stroke providing quick, precise action.
Test Fixture Actuation
Drive a small plunger in a quality-control test rig to press a button or engage a latch, relying on the 402.1 N force for consistent contact.
Is the Airtac ACE Compact Cylinder ACE32X10SB the Right Cylinder?
For a lighter duty, consider the ACE25X10 with a 245.4 N push at 0.5 MPa, or step up to the ACE40X10 which offers 628.3 N push for heavier loads. This 32 mm bore with a 10 mm stroke suits short-stroke clamping and pressing applications. Since the magnet is fitted, you can add CMSE switches for end-of-stroke detection. The male rod thread (B) allows direct attachment of tooling or a rod clevis.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X10SB FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. The port is 1/8 inch, and the rod is 12 mm with a male thread.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits in tight spaces. The fixed TPU bumper absorbs end-of-stroke impact, and the optional -S magnet allows CMSE or DMSE switches for position sensing. The operating pressure is 0.15-1.0 MPa (22-145 psi) with a speed range of 30-500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.