Airtac ACE Compact Cylinder ACE32X15B
The AirTAC Airtac ACE Compact Cylinder ACE32X15B is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X15B
This AirTAC ACE32X15B is a double acting compact cylinder built to ISO 21287, with a 32 mm bore and a 15 mm stroke. Its hard-anodized aluminium body and S45C hard-chrome plated rod deliver 402.1 N of push force at 0.5 MPa, while the fixed TPU bumper absorbs end-of-stroke impact. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, making it ideal for tight machine frames and guard enclosures.
With a male rod thread (B code) and a PT port, this unit is ready for direct linkage. Since it lacks the optional -S magnet, no CMSE or DMSE sensor can be fitted; order the -S variant if you need position sensing. For a safe working load, plan for about 241 N (24.6 kgf) of real work at 0.5 MPa, or roughly 24.6 kg of vertical lift with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE32X15B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X15B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X15B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X15B Is Used
Jig Clamping
Clamp small parts in a CNC fixture with 402.1 N push force, fitting into a tight jig body where a longer ISO 15552 cylinder would not fit.
Conveyor Stop
Actuate a stop pin on a light assembly conveyor, using the 15 mm stroke to block or release totes at a work cell.
Guard Door Interlock
Move a safety guard latch on a packaging machine, with the compact body fitting inside a slim aluminum extrusion frame.
Is the Airtac ACE Compact Cylinder ACE32X15B the Right Cylinder?
For lighter duty, consider the ACE25X15 with 245.4 N push, or step up to the ACE40X15 for 628.3 N push at 0.5 MPa. This 32 mm bore suits moderate force applications in compact spaces. The fixed TPU bumper does not hold loads; if the load must stay put when air is lost, add a rod lock or pilot check valve. Choose FA/FB flange, LB foot, or CA/CB clevis mounts to match your fixture.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X15B FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. Theoretical maximum force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
No, this ACE32X15B has no magnet because it lacks the -S code. To use CMSE or DMSE reed or solid-state switches, you must order the ACE32X15B-S variant with the optional -S magnet. The fixed TPU bumper only absorbs end-of-stroke impact; it does not lock or hold the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X15B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.