Airtac ACE Compact Cylinder ACE32X80S
The AirTAC Airtac ACE Compact Cylinder ACE32X80S is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X80S
This AirTAC ACE32X80S is a double acting compact cylinder with a 32 mm bore and 80 mm stroke, delivering 402.1 N of push force at 0.5 MPa. Its ISO 21287 short body cuts mounting length by about half compared to an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a longer unit will not.
The hard-anodized aluminium body resists wear, and the S45C steel rod with hard-chrome plating stands up to repeated cycling. The optional -S magnet is fitted here, enabling CMSE or DMSE switches for position sensing. For real work, plan on roughly 24.6 kgf of usable force at 0.5 MPa, which safely lifts about 12 kg vertically with a 2:1 margin.
Airtac ACE Compact Cylinder ACE32X80S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X80S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X80S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X80S Is Used
Jig Clamping
Mount this 32 mm bore unit in a CNC fixture to clamp small parts with 402.1 N of force at 0.5 MPa, freeing operators for loading and unloading.
Package Stop
Use the 80 mm stroke to raise a stop gate on a packaging line, diverting cartons weighing up to 12 kg with a safe margin at 0.5 MPa.
Guard Door Interlock
Install behind a machine guard to slide a locking pin into place, using the compact body to fit within the slim profile of the safety enclosure.
Is the Airtac ACE Compact Cylinder ACE32X80S the Right Cylinder?
Size this ACE32X80S against a smaller 25 mm bore that pushes 245.4 N, or step up to a 40 mm bore for 628.3 N at the same pressure. The 80 mm stroke suits short-transfer and clamping tasks, while the 1/8" port keeps plumbing simple. Since this unit has the -S magnet, pair it with CMSE or DMSE switches for reliable end-of-stroke detection. Remember, a plain ACE does not hold its load when air is removed, so add a rod lock or pilot check valve if the application requires position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X80S FAQ
At 0.5 MPa, push force is 402.1 N and pull force is 345.6 N. At 0.7 MPa, push rises to 563.0 N and pull to 483.8 N. The theoretical maximum force at 1.0 MPa is 82 kgf. These numbers assume clean, dry air within the 0.15-1.0 MPa operating range.
The ACE32X80S has a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, making it ideal for tight spaces. It uses a fixed TPU bumper at both ends to absorb impact, and the optional -S magnet allows CMSE or DMSE switches for position feedback. The body is hard-anodized aluminium for durability.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.