
The AirTAC ACE Compact Cylinder ACE50X10 is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This ACE50X10 is a double acting ISO 21287 compact cylinder with a 50 mm bore and a 10 mm stroke, delivering 981.7 N push and 881.2 N pull at 0.5 MPa. Its short body cuts mounting length by about half compared to an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length unit will not. The hard-anodized aluminium body and S45C hard-chrome rod resist wear in continuous cycling.
At 0.7 MPa the push rises to 1374.4 N, and the theoretical maximum is 200.2 kgf at 1.0 MPa. The fixed TPU bumper at each end absorbs impact, but it does not lock or hold a load; if the air supply fails, the rod drifts.
| Model | Airtac ACE Compact Cylinder ACE50X10 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Use the ACE50X10 to clamp a 50 kg fixture block in a CNC milling vise. The 981.7 N push at 0.5 MPa holds the part firmly, and the 10 mm stroke is enough to engage or release the clamp without wasting cycle time.
In a carton erector, this cylinder pushes a folded blank out of a magazine. The short stroke and 881.2 N pull retract the pusher quickly, keeping the line moving at up to 500 mm/s.
Mount the ACE50X10 on a conveyor to raise a 10 mm stop pin that diverts boxes. The 1374.4 N push at 0.7 MPa handles heavy cartons, and the compact body fits under the belt frame.
Choose the ACE50X10 when you need a short-stroke, high-force compact cylinder for a 10 mm move. If you need more reach, the ACE50X25 offers the same 981.7 N push with a 25 mm stroke, while the ACE40X10 steps down to 628.3 N push for lighter duty. The 1/8" port suits standard shop air, and the female M10x1.5 rod thread accepts common clevis or rod-end fittings. This model has no magnet, so CMSE or DMSE sensors cannot be fitted; order the -S code if you need position sensing. For mounting, FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets all bolt directly to the ISO 21287 face.
AirtacDistr lists every ACE50 order code with its price on one page at https://airtacdistr.com/products/airtac-ace50-compact-air-cylinder
Quick checklist
At 0.5 MPa, the push is 981.7 N and the pull is 881.2 N. At 0.7 MPa, the push is 1374.4 N and the pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The ACE50X10 is an ISO 21287 compact cylinder, so its body is about 50% shorter than an ISO 15552 profile cylinder, making it ideal for tight spaces. It has a fixed TPU bumper at each end to absorb impact, but it is not adjustable. This model has no magnet, so CMSE or DMSE sensors cannot be mounted; you must order the -S code to get the optional magnet for sensing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.