
The AirTAC ACE Compact Cylinder ACE50X100 is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This AirTAC ACE50X100 is a double acting compact cylinder with a 50 mm bore and 100 mm stroke, delivering 981.7 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder will not.
The fixed TPU bumper at both ends absorbs end-of-stroke impact, and the S45C hard-chrome rod resists wear in continuous cycling. Order the optional -S code to add a magnet for CMSE or DMSE sensors; this unit has no magnet fitted.
| Model | Airtac ACE Compact Cylinder ACE50X100 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Use the 981.7 N push at 0.5 MPa to clamp sheet metal parts in a welding jig, where the short body fits between locating pins and the 100 mm stroke clears the part on load and unload.
Mount this cylinder on a packaging line to tamp folded cartons into a case. The 881.2 N pull retracts the tamper quickly, and the TPU bumper prevents shock to the product at the end of each cycle.
In a CNC machine cell, this compact cylinder can actuate a small guard door or safety latch. Its 50% shorter body than an ISO 15552 profile cylinder lets it fit inside the machine enclosure, and the 100 mm stroke is enough to move the interlock pin.
Choose the ACE50X100 when you need a compact, short-stroke actuator in a 50 mm bore. It produces 981.7 N push and 881.2 N pull at 0.5 MPa, which is a step up from the 40 mm bore's 628.3 N push, and a step down from the 63 mm bore's 1558.6 N push. The 100 mm stroke is well within the 250 mm maximum standard stroke for this bore.
This cylinder is double acting, so air both extends and retracts the rod; it does not hold its position if air pressure is lost. For vertical lifting or load holding, add a rod lock or pilot check valve. The 1/8" port and female M10x1.5 rod thread match common fittings, and FA, LB, CA, and other ISO 21287 mounts bolt directly to the face.
AirtacDistr lists every ACE50 order code with its price on one page at https://airtacdistr.com/products/airtac-ace50-compact-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 981.7 N and the pull force is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force at 1.0 MPa is 200.2 kgf. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The ISO 21287 compact body saves about 50% of the mounting length compared to an ISO 15552 profile cylinder, so it fits into tight jigs and machine guards. It has a fixed TPU bumper at both ends to absorb impact, and the hard-anodized aluminium body with a hard-chrome S45C rod is built for durability. The optional -S magnet enables CMSE or DMSE sensors; this model has no magnet fitted.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.