
The AirTAC ACE Compact Cylinder ACE50X100SB is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This AirTAC ACE50X100SB is a double acting compact cylinder that pushes with 981.7 N and pulls with 881.2 N at 0.5 MPa, so it suits medium-duty automation tasks. The ISO 21287 short body trims about 50% off the mounting length of an ISO 15552 profile cylinder, letting it fit into tight guarding and compact jigs.
The hard-anodized aluminium body and S45C hard-chrome rod resist wear in continuous cycling. With the -S magnet fitted, you can add CMSE or DMSE reed or solid-state switches for position sensing.
| Model | Airtac ACE Compact Cylinder ACE50X100SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Use the ACE50X100SB to clamp a workpiece against a CNC fixture stop. The 981.7 N push at 0.5 MPa holds aluminum or plastic parts firmly during milling, and the compact body fits under a low machine guard.
Mount this cylinder on a packaging line to raise a stop gate that diverts boxes. The 100 mm stroke lifts the gate clear of the product path, and the optional magnet lets a CMSE sensor confirm the gate is down before the next box arrives.
In a small assembly press, this cylinder can push a bushing into a housing with controlled force. The 881.2 N pull stroke retracts the ram quickly, and the fixed TPU bumper at both ends reduces end-of-stroke impact on the tooling.
For lighter duty, the ACE40X100 delivers 628.3 N push at 0.5 MPa, while stepping up to the ACE63X100 gives 1558.6 N push for heavier parts. This 50 mm bore with a 100 mm stroke is a balanced choice for clamping, pressing, or transfer tasks that need moderate force and a short envelope.
The male rod thread (B) simplifies mounting with rod-end accessories, and the 1/8" port matches common air lines. Since the magnet is fitted, you can wire CMSE sensors directly for position feedback. Remember, this cylinder does not hold its load if air pressure is lost, so add a rod lock or pilot check valve for vertical or safety-critical applications.
AirtacDistr lists every ACE50 order code with its price on one page at https://airtacdistr.com/products/airtac-ace50-compact-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 981.7 N and the pull force is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi).
The magnet is fitted because this model carries the -S option, but it is not standard on every ACE cylinder. With this magnet, you can mount CMSE or DMSE reed or solid-state switches to detect the piston position. The compact ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and the fixed TPU bumper absorbs end-of-stroke energy.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.