
The AirTAC ACE Compact Cylinder ACE50X110 is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This AirTAC ACE50X110 is a double acting compact cylinder built to ISO 21287, with a 50 mm bore and 110 mm stroke. The hard-anodized aluminium body is roller-burnished inside for wear resistance, and the S45C steel rod is hard-chrome plated.
The ISO 21287 short body saves about half the mounting length of an ISO 15552 profile cylinder, which lets it fit into tight jigs and guards. A fixed TPU bumper at each end absorbs impact, and the operating speed range is 30-500 mm/s. This model has no magnet fitted (no -S code), so it cannot accept CMSE or DMSE sensors unless you order the optional -S version.
| Model | Airtac ACE Compact Cylinder ACE50X110 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Use the ACE50X110 to clamp a workpiece in a CNC milling fixture. The 981.7 N push at 0.5 MPa holds a medium steel part securely, and the compact body fits under a low-profile guard.
Mount this cylinder on a packaging line to raise a stop gate that diverts boxes. The 110 mm stroke gives enough lift to clear a 100 mm tall carton, and the fixed TPU bumper handles repeated impacts without damage.
In a warehouse stretch-wrap station, the ACE50X110 can tension a strap around a pallet load. The 881.2 N pull force at 0.5 MPa is enough to snug the strap, and the short body mounts vertically without eating into headroom.
For a lighter duty, the ACE40X110 gives 628.3 N push at 0.5 MPa, while the ACE63X110 steps up to 1558.6 N push at 0.5 MPa. This 50 mm bore is a balanced middle choice for medium-force automation. The 110 mm stroke is within the 250 mm standard maximum for this bore, so no custom order is needed. Since this unit has no magnet, choose the -S code if you plan to use CMSE or DMSE reed switches for position sensing.
AirtacDistr lists every ACE50 order code with its price on one page at https://airtacdistr.com/products/airtac-ace50-compact-air-cylinder
Quick checklist
At 0.5 MPa, push is 981.7 N and pull is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa. The port is 1/8 inch, and the rod is 16 mm with a female M10x1.5 thread.
Yes, it is an ISO 21287 compact cylinder, so its body is about 50% shorter than an ISO 15552 profile cylinder. It has a fixed TPU bumper at both ends, not an adjustable air cushion. This specific model has no magnet, so it cannot accept CMSE or DMSE sensors; you must order the -S version to get the optional magnet for sensor mounting.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.