
The AirTAC ACE Compact Cylinder ACE50X110B is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This AirTAC ACE50X110B is a double acting compact cylinder that extends and retracts its rod with air pressure, delivering a 981.7 N push force at 0.5 MPa. Its 50 mm bore with a 16 mm hard-chrome plated S45C steel rod is built for moderate duty in tight spaces, and the fixed TPU bumper at each end absorbs the impact of the stroke.
Because the body follows ISO 21287, it is about 50% shorter than an ISO 15552 profile cylinder, so it fits into machine guards and compact jigs where a full-length cylinder would not. The male rod thread (B code) allows direct coupling to linkages, and since this unit has no -S magnet, it cannot accept CMSE or DMSE sensors; order the -S option if you need position sensing.
| Model | Airtac ACE Compact Cylinder ACE50X110B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Use this cylinder to clamp a workpiece in a CNC milling fixture. The 981.7 N push at 0.5 MPa holds a steel bracket securely during drilling, and the short body fits under the machine guard.
In a packaging line, this cylinder pushes a filled carton off a conveyor onto a chute. The 110 mm stroke clears the conveyor width, and the 881.2 N pull retracts the pusher quickly for the next cycle.
Mount this cylinder on a sorting conveyor to divert parcels to a side lane. The 50 mm bore provides enough force to move a lightweight plastic tote, and the compact body saves space between conveyor sections.
For a lighter application, the ACE40X110 offers a 628.3 N push at 0.5 MPa, while the ACE63X110 steps up to 1558.6 N push at the same pressure, so you can match the force to your actual load. With a 110 mm stroke, this model is within the 250 mm maximum standard stroke for the 50 mm bore, so no custom order is needed. The 1/8" port suits standard air lines, and the male rod thread simplifies mounting to a clevis or rod end. Since there is no magnet, this cylinder is for applications that do not require position feedback; if you need sensors, choose the -S version instead.
AirtacDistr lists every ACE50 order code with its price on one page at https://airtacdistr.com/products/airtac-ace50-compact-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 981.7 N and the pull force is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa.
The ACE50X110B follows the ISO 21287 compact standard, so its body is about 50% shorter than an ISO 15552 profile cylinder. This saves mounting length in tight fixtures, but it still uses a hard-anodized aluminium body and a fixed TPU bumper at each end to absorb stroke energy. The bumper is not adjustable and does not hold a load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.