Airtac ACE Compact Cylinder ACE50X175B
The AirTAC Airtac ACE Compact Cylinder ACE50X175B is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE50X175B
This AirTAC ACE50X175B is a double acting compact cylinder, pushing with 981.7 N and pulling with 881.2 N at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, fitting into tight machine guarding and gantries where a full-length cylinder will not. The fixed TPU bumper at each end absorbs energy, and the S45C hard-chrome rod resists wear in dirty shop air.
For a safe working load, plan for about 589 N (60 kg) of real work at 0.5 MPa, not the full rating, to account for friction and acceleration. This bore also delivers 1374.4 N push at 0.7 MPa and a theoretical maximum of 200.2 kgf at 1.0 MPa, so it suits medium-force clamping and pressing tasks. The male rod thread (B code) simplifies mounting with rod-end accessories, and the 1/8" port matches common air prep units.
Airtac ACE Compact Cylinder ACE50X175B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE50X175B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE50X175B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE50X175B Is Used
Fixture Clamping
Use the 981.7 N push at 0.5 MPa to clamp sheet metal parts in a welding jig, holding them firmly during spot welding without distorting thin edges.
Carton Ejection
Mount this cylinder on a packaging line to push finished cartons off a conveyor onto a chute, using the 175 mm stroke to clear the belt width reliably.
Press Ram
In a small bench press, this cylinder provides 1374.4 N at 0.7 MPa to stamp or emboss metal tags, with the fixed TPU bumper preventing end-of-stroke shock.
Is the Airtac ACE Compact Cylinder ACE50X175B the Right Cylinder?
With a 50 mm bore, this cylinder delivers 981.7 N push at 0.5 MPa, stepping up from the 40 mm bore's 628.3 N and down from the 63 mm bore's 1558.6 N. Choose the 50 mm bore for a balance of force and compact size in medium-duty automation. The 175 mm stroke is within the 250 mm maximum standard stroke, so it ships as a standard unit. Since this model has no -S code, it has no magnet, so CMSE or DMSE sensors cannot be mounted; order the -S variant if you need position sensing. Mounting options like FA/FB flange, LB foot, or CA/CB clevis bolt to the ISO 21287 face, and the male rod thread accepts standard rod-end fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE50X175B FAQ
At 0.5 MPa, the push force is 981.7 N and the pull force is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The ACE50X175B has a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight spaces like guard enclosures or gantries. The fixed TPU bumper at both ends absorbs end-of-stroke impact, and the hard-anodized aluminium body resists corrosion. Note that this model has no magnet, so to use CMSE or DMSE sensors, you must order the -S option.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE50X175B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.