Airtac ACE Compact Cylinder ACE50X225
The AirTAC Airtac ACE Compact Cylinder ACE50X225 is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 225mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke225 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE50X225
This AirTAC ACE50X225 is a double acting compact cylinder that extends and retracts its 16 mm rod with air pressure on both strokes. It delivers 981.7 N of push force at 0.5 MPa, so for real work plan on about 589 N (60 kg) of usable load at that pressure, and it can lift roughly 30 kg vertically with a 2:1 safety margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which lets it fit into tight jigs and gantries where a full-length cylinder will not. The hard-anodized aluminium body and S45C hard-chrome rod resist wear, and the fixed TPU bumper at both ends absorbs end-of-stroke energy without any adjustment.
Airtac ACE Compact Cylinder ACE50X225 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE50X225 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE50X225
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE50X225 Is Used
Jig Clamping
Use the 981.7 N push at 0.5 MPa to clamp sheet metal fixtures in a stamping press, with the short body fitting under a die guard.
Package Stop
Position a 225 mm stroke to stop and release cartons on a packaging line, relying on the fixed TPU bumper to absorb repeated impacts.
Gantry Lift
Mount on a gantry to lift a 30 kg sensor head vertically, using the 881.2 N pull force at 0.5 MPa for the return stroke.
Is the Airtac ACE Compact Cylinder ACE50X225 the Right Cylinder?
For a lighter duty at this bore, consider the ACE40X225 with 628.3 N push at 0.5 MPa, or step up to the ACE63X225 for 1558.6 N push if you need more force. This ACE50X225 has a 1/8" port and a female M10x1.5 rod thread, and it accepts FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC mounts. Note that this model has no magnet, so order the -S code if you need to fit CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE50X225 FAQ
At 0.5 MPa, push is 981.7 N and pull is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa.
No, this model has no magnet, so CMSE or DMSE switches cannot be fitted. You must order the -S code (e.g., ACE50X225S) to get the optional magnet for sensor mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE50X225
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.