
The AirTAC ACE Compact Cylinder ACE50X5B is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 5mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This AirTAC ACE50X5B is a double acting ISO 21287 compact cylinder with a 50 mm bore and a 5 mm stroke, delivering 981.7 N of push force at 0.5 MPa. The short body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder will not. The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in high-cycle automation.
For a 5 mm stroke, the fixed TPU bumper at both ends absorbs the impact of rapid cycling, and the speed range of 30-500 mm/s suits pick-and-place tasks. Since this unit has no -S code, there is no magnet fitted, so CMSE or DMSE sensors cannot be mounted; order the optional -S magnet if you need position sensing.
| Model | Airtac ACE Compact Cylinder ACE50X5B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Use the ACE50X5B to clamp small parts in a CNC fixture; the 5 mm stroke is enough to secure a workpiece, and the 981.7 N push at 0.5 MPa holds it firmly during machining.
Mount this cylinder on a conveyor line to raise a stop gate for product separation. The short stroke and fixed TPU bumper handle frequent cycling without shock to the frame.
In an injection mold, the ACE50X5B can eject a small molded part with a 5 mm push. The 881.2 N pull force at 0.5 MPa retracts the pin reliably after each cycle.
Choose the ACE50X5B when you need a very short stroke of 5 mm with a 50 mm bore. For lighter duty, the ACE32X25 offers 402.1 N push at 0.5 MPa, while the ACE63X25 provides 1558.6 N push at 0.5 MPa if you need more force. This model has a male rod thread (B code), which simplifies mounting with rod-end accessories. Since there is no magnet, it cannot be used with CMSE or DMSE switches unless you order the -S version; for load holding, use a separate rod lock or pilot check valve because the cylinder does not hold position when air is removed.
AirtacDistr lists every ACE50 order code with its price on one page at https://airtacdistr.com/products/airtac-ace50-compact-air-cylinder
Quick checklist
At 0.5 MPa, push force is 981.7 N and pull force is 881.2 N. At 0.7 MPa, push force is 1374.4 N and pull force is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi), with proof pressure at 1.5 MPa (215 psi).
It is an ISO 21287 compact cylinder, meaning its body is about 50% shorter than an ISO 15552 profile cylinder, saving space in tight installations. This model has no magnet because it lacks the -S code, so CMSE or DMSE sensors cannot be mounted. To use sensors, you must order the version with the optional -S magnet. The fixed TPU bumper absorbs end-of-stroke impact, but it does not lock or hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.