Airtac ACE Compact Cylinder ACE50X60
The AirTAC Airtac ACE Compact Cylinder ACE50X60 is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE50X60
This AirTAC ACE50X60 is a double acting ISO 21287 compact cylinder with a 50 mm bore and 60 mm stroke, delivering 981.7 N of push force at 0.5 MPa. Its short, hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder will not.
For real-world sizing, plan for about 60 kg of usable work at 0.5 MPa (roughly 0.6 times the 981.7 N rating), or about 30 kg with a 2:1 safety margin for vertical lifting. The fixed TPU bumper absorbs end-of-stroke impact, and the S45C hard-chrome rod resists wear, but this cylinder does not hold a load when air pressure is lost.
Airtac ACE Compact Cylinder ACE50X60 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE50X60 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE50X60
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE50X60 Is Used
Fixture Clamping
Use the ACE50X60 to clamp small parts in a CNC fixture; its 981.7 N push at 0.5 MPa holds components securely, and the compact body fits under the spindle guard.
Conveyor Stop Gate
Mount this cylinder on a packaging line to raise a stop gate for cartons. The 60 mm stroke lifts the gate clear, and the 881.2 N pull retracts it quickly at 0.5 MPa.
Press Ram
In a small bench press, the ACE50X60 provides a 981.7 N push for light stamping or embossing tasks, with the fixed TPU bumper absorbing the impact at the end of each cycle.
Is the Airtac ACE Compact Cylinder ACE50X60 the Right Cylinder?
Choose the ACE50X60 when you need a compact, double acting cylinder with a 50 mm bore and a 60 mm stroke. At 0.5 MPa, it pushes with 981.7 N and pulls with 881.2 N; if you need more force, step up to the 63 mm bore (1558.6 N push), or drop to the 40 mm bore (628.3 N push) for lighter duty. This model has no magnet, so order the optional -S code if you need to mount CMSE or DMSE sensors for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE50X60 FAQ
At 0.5 MPa, the push force is 981.7 N and the pull force is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force at 1.0 MPa is 200.2 kgf.
Yes, it is an ISO 21287 compact cylinder with a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. However, this model has no magnet, so you cannot mount CMSE or DMSE sensors unless you order the optional -S code for a built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE50X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.