Airtac ACE Compact Cylinder ACE50X60S
The AirTAC Airtac ACE Compact Cylinder ACE50X60S is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE50X60S
This AirTAC ACE50X60S is a double acting ISO 21287 compact cylinder with a 50 mm bore and 60 mm stroke, delivering 981.7 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder will not.
The S in the model code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted for position sensing. For a real-world load, plan on about 60 kg of safe vertical lift at 0.5 MPa (981.7 N x 0.6 divided by 9.81), which gives you a 2:1 margin for a part that weighs about 30 kg. The fixed TPU bumper absorbs energy at both ends of the stroke, but it does not lock or hold a load, so use a rod lock or pilot check valve if the load must stay put when air is removed.
Airtac ACE Compact Cylinder ACE50X60S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE50X60S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE50X60S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE50X60S Is Used
Jig Clamping on CNC Fixtures
Mount this ACE50X60S on a CNC milling fixture to clamp a 25 kg aluminum part during drilling. The 981.7 N push force holds the workpiece firmly, and the short body keeps the fixture compact so the spindle has clearance.
Pneumatic Stop on a Packaging Line
Use this cylinder as a stop gate on a conveyor carrying cartons. The 60 mm stroke extends a rubber-tipped rod to halt a box weighing up to 30 kg, and the fixed TPU bumper prevents shock to the product at the end of the stroke.
Carton Pusher in a Palletizer
In a palletizing cell, this cylinder pushes a 20 kg carton off a transfer plate onto a pallet. The 881.2 N pull force retracts the rod quickly, and the optional magnet lets a PLC confirm the pusher is home before the next cycle.
Is the Airtac ACE Compact Cylinder ACE50X60S the Right Cylinder?
Size this ACE50X60S against the ACE40X60, which pushes 628.3 N at 0.5 MPa, or step up to the ACE63X60 for 1558.6 N of push force at the same pressure. The 50 mm bore is a middle ground for light assembly and packaging tasks, and the 60 mm stroke suits short transfer or clamping moves. The 1/8" port matches common air line sizes, and the female M10x1.5 rod thread accepts standard clevis or rod-end fittings. Because the magnet is fitted, you can add CMSE or DMSE switches for end-of-stroke detection without opening the cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE50X60S FAQ
At 0.5 MPa, the push force is 981.7 N and the pull force is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force at 1.0 MPa is 200.2 kgf. These figures assume clean, dry air at the rated pressure.
The magnet is an optional -S option, and this model carries that option, so it is fitted. You can mount CMSE or DMSE reed or solid-state switches in the body slots to detect the piston position. Without the -S code, no magnet is present, and sensors will not work.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE50X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.