Airtac ACED Double-acting Compact Cylinder ACED80X5SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X5SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke5 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED80X5SB
A double acting, double-rod compact cylinder built to ISO 21287, the ACED80X5SB pushes and pulls with identical output because a 20 mm rod exits both covers and every stroke works on the rod-side area. At 0.5 MPa that is 2356.2 N in either direction, rising to 3298.7 N at 0.7 MPa. The 5 mm stroke suits short-throw clamping and ejection moves, and the male rod thread (B code) bolts straight to external tooling.
The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight guarding and gantry frames. The through-rod resists rotation and side load and gives a symmetric mount, and the fixed TPU bumper at each end absorbs end-of-stroke energy. Because this model carries the -S magnet, CMSE / DMSE switches can be fitted for end-position sensing. As a rule of thumb, plan on roughly 1413 N of usable work at 0.5 MPa, which is about 144 kg of vertical lift with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED80X5SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X5SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X5SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X5SB Is Used
Short-stroke press fit on PCB fixtures
The 5 mm throw and 2356.2 N of force in both directions make this cylinder a fit for pressing connectors or bearings into circuit-board assembly fixtures where travel is minimal but force is not.
Symmetric clamp on a machining centre jig
A rod at each end lets one cylinder clamp from both sides of a workpiece with equal force, and the male rod thread accepts custom clamp fingers directly.
Position-verified ejection on packaging lines
With the -S magnet fitted, CMSE / DMSE switches confirm the eject stroke on carton or blister lines, while the through-rod carries a sensor flag at the rear cover.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X5SB the Right Cylinder?
At 80 mm bore this sits in the upper force band of the ACED range: 2356.2 N both ways at 0.5 MPa. If your load needs less, a 63 mm bore delivers 1458.1 N at the same pressure; if you need more, the 100 mm bore reaches 3769.9 N. The 5 mm stroke is well inside the 300 mm maximum standard stroke for this bore, so it is a catalogue item, not a made-to-order build.
Remember that a plain double-rod cylinder will drift if air is lost, so add a rod lock or pilot check where a load must stay put. Mount with FA/FB flanges, LB feet or FTC brackets plus I/Y rod knuckles on the ISO 21287 face. The -S magnet is already fitted on this model, so CMSE / DMSE switches can be ordered alongside.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X5SB FAQ
Because a rod exits both covers, force is equal in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa on every stroke, with a peak of 480.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is 1/4" PT.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow machine frames. A fixed TPU bumper at each end absorbs end-of-stroke energy. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots; FA/FB flange, LB foot and FTC brackets bolt to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X5SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.