This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE50X125B, the same code under the new prefix. The ACE is a current-production ISO 21287 compact cylinder in the same bore and stroke range; the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before ordering.

The AirTAC ACP Compact Cylinder ACP50X125B is a double acting DIN-standard tight/compact air cylinder with a Ø50mm bore and 125mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE50X125B (ISO 21287 ACE), in the same bore, stroke and force class.
AirTAC has discontinued the ACP series. Order code ACP50X125B is supplied as ACE50X125B, the current ACE compact cylinder with the same code after the prefix. The ACE is built to ISO 21287 while the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before you fit it.
The ACE50X125B you receive is a double-acting compact cylinder with a 50 mm bore and a 125 mm stroke, a 16 mm piston rod with a male rod thread (the B code) and 1/8" ports. At 0.5 MPa it pushes about 981.7 N and pulls about 881.2 N; at 0.7 MPa about 1374.4 N and 1233.7 N.
| Model | Airtac ACP Compact Cylinder ACP50X125B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE50X125B |
| Bore size | Ø50 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE50X125B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
The ACE50X125B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
About 982 N at 0.5 MPa in a short body, for fixtures and clamps where a profile cylinder is too long.
125 mm moves for part stops, pushers and gates on assembly and packaging lines.
Seating, marking and light press-fit work within the cylinder's force range.
Order by the ACP code or by ACE50X125B; both describe the same cylinder. When you replace an ACP, match bore (50 mm), stroke (125 mm), rod end (male) and magnet (no), then check the ACE drawing for the mounting holes and overall length.
For less force the 40 mm bore is the next size down; the 63 mm bore gives about 60% more push.
AirtacDistr lists every ACP50 order code with its price on one page at https://airtacdistr.com/products/airtac-acp50-compact-air-cylinder
Replacement checklist
AirTAC has discontinued the ACP series. Order code ACP50X125B is supplied as ACE50X125B, the current ACE compact cylinder with the same code after the prefix. The ACE is built to ISO 21287 while the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before you fit it.
At 0.5 MPa about 981.7 N push and 881.2 N pull; at 0.7 MPa about 1374.4 N and 1233.7 N. Usable force is lower because of friction, so size with a margin.
Send us the quantity and destination. We confirm price, availability and lead time on the ACE50X125B replacement — usually within 7 hours.