verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE50X40, the same code under the new prefix. The ACE is a current-production ISO 21287 compact cylinder in the same bore and stroke range; the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before ordering.

AirTAC ACP Series · Discontinued Compact Cylinder

Airtac ACP Compact Cylinder ACP50X40

The AirTAC ACP Compact Cylinder ACP50X40 is a double acting DIN-standard tight/compact air cylinder with a Ø50mm bore and 40mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE50X40 (ISO 21287 ACE), in the same bore, stroke and force class.

  • BoreØ50 mm
  • Stroke40 mm
  • Port size1/8"
  • Acting typeDouble acting
  • Rod threadM10×1.5
  • StatusDiscontinued → ACE50X40
$65.93 $73.43Save 10% Ships as ACE50X40 (current AirTAC replacement)
Ships as ACE50X40, the current AirTAC replacement (the same code under the new prefix). Order this code as usual. Your cart, checkout and order confirmation will show the ACE50X40 we ship. View ACE50X40
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACP50 stroke, mounting and version on one page All ACP50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACP Compact Cylinder ACP50X40

AirTAC has discontinued the ACP series. Order code ACP50X40 is supplied as ACE50X40, the current ACE compact cylinder with the same code after the prefix. The ACE is built to ISO 21287 while the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before you fit it.

The ACE50X40 you receive is a double-acting compact cylinder with a 50 mm bore and a 40 mm stroke, a 16 mm piston rod with an M10×1.5 female rod thread and 1/8" ports. At 0.5 MPa it pushes about 981.7 N and pulls about 881.2 N; at 0.7 MPa about 1374.4 N and 1233.7 N.

Airtac ACP Compact Cylinder ACP50X40 Technical Specifications

ModelAirtac ACP Compact Cylinder ACP50X40
SeriesACP DIN compact cylinder (discontinued)
ReplacementACE50X40
Bore sizeØ50 mm
Stroke40 mm
Acting typeDouble acting
Port size1/8"
Rod threadM10×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed bumper (both ends)
Max standard strokeUp to 250 mm

Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE50X40 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N881 N
0.7 MPa1374 N1234 N
Max (@1.0 MPa)200 kgf

The ACE50X40 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac ACP Compact Cylinder ACP50X40

ACPDIN compact cylinder (double-acting, discontinued).
50Bore size in mm.
×40Stroke length in mm.
SOptional built-in magnet for sensor position sensing (omit for no magnet).
BRod type: B = male thread; blank = female thread.

Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).

Where the Airtac ACP Compact Cylinder ACP50X40 Is Used

precision_manufacturing

Compact clamping

About 982 N at 0.5 MPa in a short body, for fixtures and clamps where a profile cylinder is too long.

conveyor_belt

Stops and pushers

Short 40 mm moves for part stops, pushers and gates on assembly and packaging lines.

compress

Light pressing

Seating, marking and light press-fit work within the cylinder's force range.

Replacing the Airtac ACP Compact Cylinder ACP50X40 with the ACE50X40

Order by the ACP code or by ACE50X40; both describe the same cylinder. When you replace an ACP, match bore (50 mm), stroke (40 mm), rod end (female) and magnet (no), then check the ACE drawing for the mounting holes and overall length.

For less force the 40 mm bore is the next size down; the 63 mm bore gives about 60% more push.

AirtacDistr lists every ACP50 order code with its price on one page at https://airtacdistr.com/products/airtac-acp50-compact-air-cylinder

Replacement checklist

  • ✓ Current-production ACE → ACE50X40
  • ✓ Same bore / stroke / force class
  • ✓ Confirm ISO 21287 mounting dimensions
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S for magnet if you need sensors
View ACE50X40

Airtac ACP Compact Cylinder ACP50X40 FAQ

AirTAC has discontinued the ACP series. Order code ACP50X40 is supplied as ACE50X40, the current ACE compact cylinder with the same code after the prefix. The ACE is built to ISO 21287 while the ACP followed the older DIN short-body format, so check the ACE drawing for mounting dimensions before you fit it.

At 0.5 MPa about 981.7 N push and 881.2 N pull; at 0.7 MPa about 1374.4 N and 1233.7 N. Usable force is lower because of friction, so size with a margin.

Related AirTAC ACE Cylinders

Request a Quote for the ACE50X40

Send us the quantity and destination. We confirm price, availability and lead time on the ACE50X40 replacement — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.