This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED80X45 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED80X45 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD80X45
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD80X45 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø80mm bore and 45mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED80X45 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke45 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- StatusDiscontinued → ACED80X45
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD80X45
A double acting compact cylinder with a rod leaving both covers, the ACPD80X45 delivers 2356.2 N at 0.5 MPa in each direction because both strokes work on the rod-side area. The 80 mm bore and 45 mm stroke suit short-stroke, high-force jobs such as clamping and press-fit fixtures, running at 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
The hard-anodized aluminium body is an ISO 21287 short build that saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guarding. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag. Fixed TPU bumpers sit at both ends. Note this model is discontinued: the current-production drop-in is ACED80X45, same bore, stroke and force class. As a sizing guide, plan on about 1414 N of real work at 0.5 MPa, which lifts roughly 72 kg vertically with a 2:1 margin.
Airtac ACPD Double Rod Compact Cylinder ACPD80X45 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD80X45 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED80X45 |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED80X45 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD80X45
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD80X45 Is Used
Press-fit clamping fixture
The 2356.2 N both-ways force at 0.5 MPa seats bearings or bushings in a 45 mm stroke automotive assembly fixture, with equal return force for part ejection.
Gantry pick-and-place stopper
The short ISO 21287 body fits under low gantry rails on electronics lines, and the rear rod carries a flag for CMSE / DMSE switches when the -S magnet is ordered.
Bottle-line gate actuator
On a packaging conveyor, the through-rod drives a reject gate symmetrically at 30-500 mm/s, with fixed TPU bumpers absorbing end-of-travel shock.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD80X45 with the ACED80X45
Pick the ACPD80X45 when a 45 mm stroke must push or pull about 2356.2 N at 0.5 MPa from both ends. If the load is lighter, the 63 mm bore gives 1458.1 N at 0.5 MPa; if you need more, the 100 mm bore reaches 3681.6 N. Remember the piston drifts when air is lost, so add a rod lock or pilot check for a held load. Mounting uses FA/FB flange or LB foot on the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches. Since this cylinder is discontinued, order ACED80X45 and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ACED80X45
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD80X45 FAQ
Because a rod exits both covers, output is equal both ways: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, both on the rod-side area. Maximum force at 1.0 MPa is 480.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
This model is discontinued; the current drop-in is ACED80X45, swapping the P for an E with the same 80 mm bore, 45 mm stroke and force class. It mounts via FA/FB flange or LB foot on the ISO 21287 face, has a female M12x1.75 rod thread, a 1/4" port and fixed TPU bumpers. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard.
Request a Quote for the ACED80X45
Send us the quantity and destination. We confirm price, stock and lead time on the ACED80X45 replacement — usually within 7-8 hours.