This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED80X90S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED80X90S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD80X90S
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD80X90S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED80X90S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- StatusDiscontinued → ACED80X90S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD80X90S
Double acting with a rod leaving both covers, the ACPD80X90S pushes and pulls with identical output: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in either direction, because both strokes work on the rod-side area. The 80 mm bore carries a 20 mm through-rod with a female M12x1.25-class M12x1.75 rod thread and 1/4" ports, and the fitted -S magnet accepts CMSE / DMSE switches for end-position sensing. Note this model is discontinued; the current-production drop-in is the ACED80X90.
The hard-anodized aluminium body is an ISO 21287 short build that saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames and gantries. A fixed TPU bumper sits at each end, speed spans 30-500 mm/s, and pressure runs 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof. For planning, count on about 1414 N of usable push at 0.5 MPa, which lifts roughly 120 kg vertically with a 2:1 margin.
Airtac ACPD Double Rod Compact Cylinder ACPD80X90S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD80X90S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED80X90S |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED80X90S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD80X90S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD80X90S Is Used
CNC fixture clamping
The symmetric 2356.2 N output clamps aluminium die-cast housings on a machining fixture from either side, with the rear rod driving a workpiece-present sensor flag.
Conveyor pusher gates
A 90 mm stroke diverts cartons on a packaging line at 30-500 mm/s, and the through-rod keeps the pusher plate square under off-center loads.
Battery-change lift assist
With about 120 kg of vertical lift capacity at a 2:1 margin, the cylinder raises battery trays on an assembly cell, guided by CMSE switches at both ends.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD80X90S with the ACED80X90S
At 2356.2 N per side at 0.5 MPa, the 80 mm bore suits clamping and pressing fixtures in the 200-350 kgf range; step down to the 63 mm bore (1458.1 N) for lighter tooling or up to the 100 mm bore (3681.6 N) for heavy presses. The through-rod resists rotation and side load and lets the rear rod carry a sensor flag, while FA/FB flange or LB foot mounting bolts to the ISO 21287 face. Remember the piston drifts if air is lost - add a rod lock or pilot check for a held load. Order the ACED80X90 as the current replacement and confirm ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ACED80X90S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD80X90S FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so output is equal either way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. The 20 mm rod exits both covers, ports are 1/4", and the fitted -S magnet works with CMSE / DMSE switches.
It is a discontinued ISO 21287-style compact with a hard-anodized aluminium body and S45C hard-chrome rod, fixed TPU bumpers at both ends, and FA/FB flange or LB foot mounting. The current drop-in is the ACED80X90 - confirm the ISO 21287 mounting dimensions before you swap, since the ACP follows the older DIN-standard footprint.
Related AirTAC ACE Cylinders
Request a Quote for the ACED80X90S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED80X90S replacement — usually within 7-8 hours.