This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ATE32X10S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ATE32X10S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ATP Single Acting Port Compact Cylinder ATP32X10S
The AirTAC Airtac ATP Single Acting Port Compact Cylinder ATP32X10S is a single acting, pull (spring return) DIN-standard tight/compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ATE32X10S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM8×1.25
- StatusDiscontinued → ATE32X10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ATP Single Acting Port Compact Cylinder ATP32X10S
A single acting pull cylinder with spring return, the ATP32X10S keeps the rod extended at rest and uses air at 0.2 MPa minimum to retract it over a 10 mm stroke. The 32 mm bore delivers 296 N of pull at 0.5 MPa and 434.2 N at 0.7 MPa, both figures already net of the return spring, so no derating math is needed. This model is discontinued; the current-production replacement is the ATE32X10 in the same bore, stroke and force class.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters inside tight jigs and guarding. The -S code on this unit means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the hard-anodized aluminium body. In practice, plan on roughly 178 N of usable work at 0.5 MPa, and expect about 15 kg of vertical lift with a 2:1 margin.
Airtac ATP Single Acting Port Compact Cylinder ATP32X10S Technical Specifications
| Model | Airtac ATP Single Acting Port Compact Cylinder ATP32X10S |
|---|---|
| Series | ATP DIN compact cylinder (discontinued) |
| Replacement | ATE32X10S |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 25 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ATE32X10S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 296.0 N |
| 0.7 MPa | 434.2 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac ATP Single Acting Port Compact Cylinder ATP32X10S
| ATP | DIN compact cylinder (single-acting pull, spring-return, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ATP Single Acting Port Compact Cylinder ATP32X10S Is Used
Spring-out clamp on a CNC fixture
The spring holds the clamp closed on a machined aluminum bracket; 296 N of air pull at 0.5 MPa retracts the plunger in 10 mm for part changeover.
Position-verified gate latch
With the -S magnet fitted, a DMSE switch confirms the latch is fully retracted before a packaging line's guard interlock releases.
Fail-extended lift pin
A locating pin under a 15 kg pallet nest stays up on air loss; 0.2 MPa is enough to pull it down for indexing on a rotary table.
Replacing the Airtac ATP Single Acting Port Compact Cylinder ATP32X10S with the ATE32X10S
At 32 mm bore this sits mid-range: a 25 mm bore pulls about 170.9 N at 0.5 MPa, while a 40 mm bore reaches 500.3 N, so step up if your mechanism needs more than roughly 178 N of working pull. The 10 mm stroke is well inside the 200 mm standard range for this bore. Remember the spring returns the rod to its extended home position on air loss and will not hold a mid-stroke setting. FA/FB flange, LB foot and CA/CB clevis mounts, plus the female M8x1.25 rod thread, carry over to the ATE32X10 - confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ATE32X10S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ATP Single Acting Port Compact Cylinder ATP32X10S FAQ
Pull is 296 N at 0.5 MPa and 434.2 N at 0.7 MPa, both net of the return spring. Operating pressure is 0.2-1.0 MPa (28-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 50-500 mm/s, temperature -20 to +70 C, and air filtered to 40 um. The port is 1/8" and the female rod thread is M8x1.25.
A fixed TPU pad at each end simply decelerates the rod at the ends of travel and never locks or brakes a load. The -S code means the magnet is fitted on this unit, so CMSE or DMSE switches can be mounted on the body. The ATP family is discontinued; the ATE32X10 is the current ISO 21287 drop-in for the same bore, stroke and force class - confirm mounting dimensions before ordering.
Request a Quote for the ATE32X10S
Send us the quantity and destination. We confirm price, stock and lead time on the ATE32X10S replacement — usually within 7-8 hours.