Airtac B06-SAI Battery-specific ISO Standard Cylinder B06-SAI32X25S
AirTAC B06-SAI32X25S Battery-Optimized ISO Cylinder Specifications
- Full model: B06-SAI32X25S
- Bore size: 32mm (ISO 6432 standard)
- Stroke: 25mm (±1mm adjustability)
- Operating pressure: 0.1–0.9 MPa
- Cushioning: Adjustable pneumatic cushion (dual-side)
- Action type: Double-acting
- Mounting style: Basic profile with axial mounting holes
- Sensor compatibility: M9/M12 magnetic switches (non-included)
- Port size: G1/8 (BSPP thread)
- Material:
- Tube: Hard anodized aluminum alloy
- End caps: Die-cast aluminum
- Piston rod: Stainless steel (SUS304)
- Seal material: Nitrile rubber (NBR) with wear-resistant ring
- Temperature range: -20℃ to +80℃
- Weight: 0.82kg (without accessories)
- Dimensions:
- Length: 102mm (full retraction)
- Width: 40mm (mounting face)
- Height: 42mm (profile height)
- Rod end: M10×1.25 external thread
- IP rating: IP65 (standard wipers)
- Lubrication: Pre-lubricated (DIN 51503 VG32 oil equivalent)
High-efficiency pneumatic cylinder specifically engineered for battery-powered systems requiring ISO-standardized dimensions. Features low-friction seals (≤0.15 dynamic friction coefficient) and optimized air consumption, achieving 15% better energy efficiency compared to standard series. The compact profile incorporates anti-rotation guidance and dust-resistant construction.
- Lithium battery module assembly robots
- Portable medical compression devices
- AGV (Automated Guided Vehicle) clamping systems
- Solar tracker positioning mechanisms
- Mobile laboratory equipment
Installation guidelines:
- Align within 0.2mm perpendicularity tolerance during mounting
- Use backup nuts when exceeding 0.5MPa side loads
- Maintain 85%-110% rated voltage for magnetic sensors
- Recommended cycle rate: ≤80 CPM (cycles per minute)
| Property | Property Value |
|---|---|
| sku | B06-SAI32X25S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.